Sometimes, the Sharp TV remote may not function properly. This can be due to weak batteries, faulty IR sensors, signal interference, pairing issues, circuit board failure, etc. Except for physical damage, other remote issues can be fixed by trying some workarounds. This article explains practical solutions to fix the Sharp TV remote that is not working.
Before trying the solutions, you should know the exact cause of remote problems, which will help prevent them from happening next time.
| Problems | Causes | Fixes |
|---|---|---|
| Remote signals not reaching the Sharp TV | Obstructing objects in the remote’s line of sight | Relocate objects that were in front of the TV receiver |
| Remote buttons stuck | Accumulation of dust and debris in the button gaps | Clean the Sharp TV remote |
| TV not responding to remote signals | Technical glitches | Restart the Sharp TV |
| Slow responsive remote or not pairing with the TV | The remote may not be in use for a long time | Reset the Sharp TV remote |
| Defective remote | Damage in the remote’s internal component | Repair or buy a replacement remote |
Use the Sharp TV Remote from an Ideal Distance
Operating a remote from a closer distance/angle from the TV is mandatory. To know the exact distance, refer to the Sharp TV remote manual. The ideal distance for using the remote is fewer than 26 feet, and the angle is 30 degrees vertical or horizontal. Then, check whether the Sharp TV responds to the remote commands.
Remove the Obstructing Objects
Sometimes, you may get a late response from Sharp TV when pressing remote keys. It happens if an object blocks the Sharp TV from receiving signals from the remote. Locate such objects and ensure the remote has a clear line of sight. Afterward, operate the Sharp TV remote and test if it works without delayed responses.
Power Cycle the Sharp TV
Sometimes, the Sharp TV may encounter problems with receiving remote signals because it has been turned off for a long time. To fix this, power cycle the Sharp TV.
- Plug the Sharp TV’s power cord from the electric socket.
- Hold the TV Power button for 20 seconds.
- After certain minutes, plug the TV cable into the electric point.
- Finally, press the Power button to turn on your Sharp TV.
Check if your TV responds to the remote signals. If not, try the next fix.
Clean the Remote Controller
Sometimes, we may leave the Sharp TV remote without a cover, which allows tiny dust particles to settle into it. These dust particles eventually fill the button gaps, making the buttons stuck. So, pick a soft cloth and wipe all the residue from the remote. If possible, dip the cotton microfiber cloth in an Isopropyl alcohol and clean the remote. Also, ensure that the remote’s IR sensor is cleaned thoroughly.
Replace the Remote Batteries
Batteries determine the proper functioning of the TV remote controller. The Sharp TV remote runs with AA or AAA batteries, so ensure you use a properly powered battery. Also, remove the old or bulged batteries from the remote and replace them with new batteries. Then, check whether your remote can control the Sharp TV. If it doesn’t work, try the next method.
Re-Pair the Sharp TV Remote
The remote may not work if it has been unpaired from your Sharp TV. Sometimes, the remote may accidentally unpair from the TV. In such cases, pairing the remote back with the Sharp TV is needed to control it.
- For Sharp TV Google TV remote – Ensure the TV is turned on→ Hold the OK and Home buttons when the pairing prompt appears → The remote will pair with the Sharp TV.
- For Sharp Android TV remote – After powering on the TV, a pairing prompt will appear → Hold the Left and Home keys for 5 seconds → Select the Remote → Press the OK key to pair.
- For Sharp Roku TV remote – Ensure Sharp TV is powered on→ Hold the Pairing button on the remote until the status light blinks → The remote will pair.
Update the Sharp TV Firmware
If your Sharp TV fails to detect the remote, it is likely due to outdated firmware. You should update the TV software and then pair the remote.
- For Sharp Android/Google TV – Navigate to Settings → Select System (or) Device Preferences → Choose About → Tap System Update → Hit Check for update → A new version will be installed, if available.
- For Sharp Roku TV – Go to Settings → Select System → Click System update → Tap Check Now → Firmware will be upgraded if the latest version is available.
Reset the Sharp TV Remote
Resetting the Sharp TV remote is a reliable technique to fix all remote problems. Upon resetting, you can fix the remote technical issues, electric fluctuations, etc. However, after performing a remote reset, you must pair the remote back with your Sharp TV.
- Reset Sharp Google TV remote – Turn off the Sharp TV and remove batteries from the remote → Hold the Home key and insert batteries into the remote → Once the remote light turns off, let go of the Home button.
- Reset Sharp Android TV remote – Once you turn off the Sharp TV, remove its power cord from the electric socket → After a minute, plug the TV’s power cable into the socket → Hold the TV Power button.
- Reset Sharp Roku TV remote – Remove the batteries from the remote → Unplug the TV cable from the socket → After a minute, plug the TV cable into the power socket → Once the TV logo comes, insert the batteries into the remote → Hold the Reset key for five seconds → The remote will pair once the status light stays idle.
Examine the Remote Hardware Parts
If the Sharp TV remote still doesn’t work after resetting it, there may be an issue with its IR emitter. Open the camera app on your smartphone and aim the Sharp TV remote towards it. Press the Power button, and a light should seen via the camera app. If not, the remote’s IR is damaged. In the same way, press all the buttons and check whether the light flashes.
Contact Sharp Customer Support
Once you confirm the issue with the remote’s hardware, visit the Sharp service center. They will inspect the remote condition and tell you what to do next. You can also visit the Sharp website to learn the troubleshooting techniques. Otherwise, dial 1(800) 237 4277 and seek the support team’s assistance regarding the issue.
Try These Remote Alternatives
If you have submitted your Sharp TV remote for repair, use these remote alternatives in the meantime to operate your TV.
- Use a keyboard or mouse – Connect the keyboard or mouse dongle to the Sharp TV’s USB port. Then, you can control your Sharp TV using the mouse cursor. If you don’t have one, buy a wireless keyboard from Amazon.
- Use remote apps – Install the Sharp TV remote app on your phone. To use the app, connect your Sharp TV to WiFi, which is the same network as your phone. Then, pair your TV with the app and start controlling it.
For Sharp non-smart TV, you can’t use WiFi-based remote apps. In that case, you can use the non-smart TV universal remote to control your Sharp TV. You only need to program it using the respective remote codes.
FAQ
Yes. Use The Roku App on an iPhone or Android to control the Sharp Roku TV without a remote. You can get this app by visiting the Play Store or App Store.
Eject the old batteries, replace them with new batteries, and test if the remote works. If it doesn’t, reset the Sharp TV remote and try again.
