If the Panasonic TV remote is not working or responding slowly, many people may think it’s time to replace it. However, there is no need to buy a replacement remote unless it has physical damage. The reasons behind remote problems are simple, such as weak batteries, pairing issues, stuck buttons, signal interference, etc. You can fix these remote issues by attempting some fixes, which are given in the following section.
Have a look at the table below to get an idea of what causes the Panasonic TV remote to not work. Based on that, try the recommended solution to make the remote work quickly.
Cause | Reason | Solution |
---|---|---|
Remote signals are obstructed | The presence of blocking objects in the remote’s signal path | Relocate the blocking objects |
Panasonic TV not receiving remote signals | A technical error in the TV | Power cycle the Panasonic TV |
Remote buttons stuck | Accumulation of tiny dust particles | Clean the Panasonic remote |
Remote fails to function | Low or drained batteries | Replace the remote batteries |
Remote completely dysfunctional | Defective hardware or broken IR emitter | Repair or buy a replacement remote |
Try Controlling the TV from an Appropriate Distance
The ideal distance to use a Panasonic TV remote from the TV is 30 feet. However, some Panasonic TV remotes may vary depending on their connectivity technologies. To find out the exact value, refer to your Panasonic TV remote’s user manual. After you know the value, keep your remote at the correct distance and press the Power button to switch on your Panasonic TV. If it doesn’t work, try the next fix.
Relocate the Obstructing Objects
Sometimes, big objects between your Panasonic TV and the remote may block the incoming signals from the remote. This is very important, especially if you use an IR remote. Make sure that your Panasonic TV has no direct contact with sunlight rays, fluorescent lights, wireless routers, etc. Once you relocate them, check whether the Panasonic TV remote is working.
Clean the Panasonic TV Remote
Since you leave the Panasonic TV remote uncovered, tiny particles may deposit on the remote buttons, IR emitter, and circuit components. This dust and debris may stop the Panasonic TV remote from functioning normally. To resolve this, pick a soft cloth and gently wipe out all the residue from the remote. If possible, disassemble the remote and wipe the remote’s button pad using a microfiber cotton cloth. Then, check whether your Panasonic TV responds to the remote commands.
Replace the Panasonic TV Remote Batteries
The primary component that determines the function of the Panasonic TV is the batteries. Using the remote with old or bulging batteries will affect its functionality. So, remove the batteries from the battery compartment and check whether they have adequate charge to work. If the batteries are depleted, replace them with new batteries and try using a Panasonic TV remote.
Program the Panasonic TV remote
If your remote cannot control your Panasonic TV, it might have accidentally unpaired from the TV. So, you have to re-pair the Panasonic TV remote to bring it back to work.
- Panasonic Viera TV – Turn on the Panasonic TV → Hold the OK, Mute, and number 2 buttons for 3 seconds → Select the Mode and press OK to pair.
- Panasonic Google TV – After powering the TV on, a remote pairing prompt will appear → Hold the OK and Home buttons for 5 seconds → The remote will be paired.
- Panasonic Android TV – Switch on the TV → A pairing message will appear → Hold the Home and Left buttons for 5 seconds → Choose your remote and click the OK button.
Reset the Panasonic TV Remote
Resetting is an effective technique for fixing the remote not working issue. Most issues will be fixed after you reset your Panasonic TV remote. Once done, you have to pair the remote again with your Panasonic TV.
- Panasonic Viera TV remote: Turn off the Panasonic TV → Remove the batteries from the remote → Press all remote buttons two times → Insert the batteries into the remote.
- Panasonic Google TV remote: Turn off the Panasonic TV → Remove the remote batteries → Long press the Home button and insert the batteries → Release the Home button when the light turns off.
- Panasonic Android TV remote: After powering off the TV, remove the TV cable from power → Then, plug back the TV cable and hold the TV Power button → Press the OK and Home buttons to pair the remote with your Panasonic TV.
Test the Remote IR Emitter
If the Panasonic TV remote sensor is not working, you have to test the remote’s IR emitter. To do that, open the camera app on your smartphone and aim the Panasonic TV remote towards the smartphone’s rear camera. Press the Power button on the remote, and now you should see a flashlight on the camera screen. If you can’t see any light, then the remote’s IR emitter is faulty.
Contact Panasonic Customer Support
If you want to repair the damaged remote sensor or buttons, you can reach Panasonic TV customer support through their official website. Contact them and raise queries regarding your remote issue. The customer team will help you with what you can do to bring back the original remote functionality. If your remote is broken or the IR emitter is damaged, you can request a replacement.
Try Remote Alternatives
If your Panasonic TV remote is missing, you can try these remote alternatives to control your Panasonic TV.
- Use TV Buttons – Most Panasonic TVs have physical Power, Volume, Channel, and Menu buttons. Use these buttons to control your Panasonic TV.
- Use Remote Apps – Get the best Panasonic TV remote app on your Android or iPhone and pair it with your TV. Then, open the remote app and use the icons to operate your Panasonic TV through your phone.
FAQ
You can reset the Panasonic TV remote to fix this issue. Also, try reinserting new batteries into the remote and check if it helps.