JVC TV Remote Not Working? Possible DIY Fixes to Try

Does your JVC remote malfunction? worry not. The JVC TV remote not working is a common issue faced by many users. This issue may arise due to insufficient battery power, sensor problems, pairing issues, etc. However, this article is enriched with the best working solutions to troubleshoot the remote issue. After going through the upcoming sections, you can fix the JVC remote yourself.

Before proceeding to the solutions, it is necessary to determine the cause of the JVC TV remote not working issue. The primary reasons for the remote problem are given below.

Problems	Reasons	Fixes
Battery Issue	Battery with low power or drained completely	Replace the old batteries with newer ones
Pairing Issue	Remote might have unpaired	Pair the remote back to the JVC TV
Remote Button Stuck	Accumulation of dust particles	Clean the remote
Remote Malfunctioning	A glitch in the remote	Reset the JVC remote
Sensor or hardware issue	Damage in components of the remote	Contact JVC support or replace the remote

Change the Remote Batteries

Batteries are the pulse component of the remote, and they play a vital role in providing the power supply. If the batteries in the remote are at low charge or drained, it cannot properly convey signals or control the TV. So, ensure that your remote’s battery is at full power. If the old battery seems to be drained, replace it with a new one. Ensure you insert the batteries in the appropriate position.

Remove the Signal Obstructions

For the TV to be seamlessly controlled using the remote, the signal path should be clear. The presence of objects near the TV receiver may block the signals emitted from the remote. So, ensure that there are no big blocking objects between your JVC TV and the remote. If found, remove those objects and try controlling the TV.

Clean the JVC TV Remote and its Buttons

As we leave the remote in the open space, there is an increased chance for accumulation of tiny or dust particles in the IR emitter or buttons. These deposited particles may disrupt the connection between the JVC TV and the remote. In this scenario, if you attempt to access your TV using the remote, the TV may fail to respond as the signals from the remote would not reach the TV.

This dust and debris accumulate not only on the remote sensor but also between the gaps in the buttons and the remote panel. This may cause the button to be stuck or not to respond. To fix this, pick a clean, soft cloth and wipe all the dust particles from the remote sensor & buttons to fix the problem.

For best results, buy an isopropyl alcohol on Amazon and use it to clean the dirt thoroughly.

Check Whether the Remote is Paired with the TV

In rare cases, the JVC TV might automatically unpair the remote. If you use a disconnected or unpaired remote, you cannot control your TV. To rectify this, you have to re-pair your remote back to the JVC TV.

JVC Fire TV Remote

• Open Settings on your TV and click the Controller & Bluetooth Devices option.
• Select the Amazon Fire TV Remotes option and tap Add New Remote.
• Hold the Home button on the remote which you want to pair.
• From the list, select your remote to pair.

Pair JVC Roku TV Remote

• If you have a Roku basic remote, simultaneously hold the Back and Home buttons. Once the light flashes, release the button to pair the remote.
• If you have a remote with the pairing button, press and hold the pairing button and release it when the light flashes to pair the remote.

JVC Android TV Remote

• Hit the Home key on the JVC Android TV remote.
• On the TV screen, choose Settings and select Remote & accessories.
• Click Add Accessory. After a few seconds, hold the Enter and Volume buttons until you see a light flashing.
• Select your remote on the screen to pair it, and the light will stop flashing.

Pair JVC Google TV Remote

• When the pairing prompt appears on your screen, hold the Home and OK buttons together.
• You can see a pairing symbol on the screen. Once you pair back the remote, check whether the remote is now controlling your TV.

Reset the JVC TVRemote

Resetting the JVC TV remote is an effective troubleshooting technique. In this process, the remote will be completely set free from crashes or technical issues. Also, note that during the resetting process, the remote will be unpaired from the JVC TV. So, you have to pair the remote back with the TV to make it work.

• Unplug the TV from the power cord.
• Remove the batteries from the remote. Hold the Home or Power button. For JVC Fire TV, press the Left, Menu, and Back buttons.
• While holding the button, insert the batteries into the remote. Plug the power cord into the TV and turn on the TV.
• Finally, press the Home button or Pairing button on the remote to pair it with your TV.

If the JVC TV remote is still not working after resetting, you should test the signal emitter.

Test the Remote’s IR Emitter

In some cases, the remote’s IR emitter might get broken due to an accidental fall or wear and tear. Due to this, you will find your JVC TV remote not working. To check whether the problem is with the JVC TV remote’s IR emitter, you can perform a simple camera test. Grab your iPhone or Android smartphone and open the camera app. Then, point the JVC TV remote’s signal head facing the rear camera.

You can now see the remote’s IR emitter clearly. Press any buttons on the JVC TV remote to see if the flashlight can be seen on the phone screen. If a flashlight appears, the remote’s IR emitter is fine. If it doesn’t, the IR emitter is defective. You can either visit the remote service center to fix it or buy a replacement remote.

Contact JVC Customer Support

If the remote problem persists, the issue might be due to damage to the hardware parts or board. You can check the JVC support website for contact details to raise a service request. If you surely know the remote has physical damage, visit the nearby service center and have the issue fixed in a few working days.

Alternate Ways to Control the JVC TV Without a Remote

If you submit your remote for servicing or order a new remote, it may take some days to get ready and arrive at your doorstep. Until then, you can use the following ways to operate your JVC TV.

• JVC Remote Apps – Luckily, you can control the TV with the help of remote apps on your phone. Get the JVC TV remote app on your smartphone. Then, connect your JVC TV to WiFi, which should be identical to your iPhone or Android. Finally, pair the remote app to the TV and start controlling the TV from the couch.
• Keyboard or Mouse – If you have a wireless keyboard/mouse, plug a USB dongle into the JVC TV’s USB port. Once it detects, an air mouse pointer will appear on the TV screen. Use it to operate the JVC TV while sitting on a sofa or bed.
• Universal Remote – If your JVC remote is entirely dead, you can buy a universal remote from Amazon. The best thing about a universal remote is that it can perform all the functions that a JVC original remote can do. The only need is to pair the universal remote to the JVC TV using remote codes.

FAQ