Kodak TV Remote Not Working? Quick Fixes to Try

It will be annoying to find out that your Kodak remote is not working when you decide to binge-watch a series on the weekend. In such circumstances, you can easily fix the issue and bring your remote back to working condition with DIY fixes. This article illustrates practical workarounds to fix the issue of the Kodak TV remote not working. Thus, helping you don’t need to buy a replacement remote.

The table below showcases the factors that are responsible for the Kodak TV remote not working. Knowing these things can prevent the remote issues from being repeated again.

Problems	Reasons	Solutions
The Kodak TV remote is completely dysfunctional	Dead or weak batteries	Replace the batteries on the remote
Intermittent issues on the Kodak TV remote	Signal interference or blockage	Remove the objects that interfere with the remote signals
A few buttons on the remote are not working	Physical damages or glitches on the remote	Re-pair the remote or replace the faulty component
Remote unpairs frequently	Technical issues on the remote	Reset the Kodak TV remote
The remote doesn’t respond after the reset	There might be any hardware issues on the remote	Contact the customer support of Kodak TV

Check and Replace the Kodak TV Remote Batteries

Take your Kodak TV remote and remove the battery compartment door. Remove the batteries from the Kodak remote and clean the battery terminals on the remote using a soft cloth with a solution. If you haven’t changed the batteries for a while, replace the batteries with a new one.

While inserting the batteries on the Kodak remote, ensure you place the positive and negative diodes according to the indication. Also, check if you have replaced both batteries. You should not use one old battery and one new battery. After that, point the Kodak TV remote toward the TV and check whether it is working or not. If not, you can move to the next step.

Clear the Signal Obstructions

If you are using an infrared remote and it is working only when you place it in a particular position, there is a possibility that your remote signals are blocked. Hence, make sure the line of sight between your remote and TV should be clear. Remove the objects or obstructions between your TV and the remote, if any.

When audio systems, wireless routers, or microwave ovens are placed near the TV, they will intrude with signals sent by the remote. So, ensure you don’t place those devices near the TV or the remote to avoid signal interference.

Also, clean the IR sensor on your remote and the receiver on your TV if it is covered with dirt or dust. Once you have cleared all the things that block the remote signals, point your remote toward the TV and use it within a 10-foot range. If this trick does not solve the remote issue, you can try the next fix.

Pair the Kodak TV Remote

If none of the buttons on your Kodak TV remote works other than the Power and Volume buttons, it means that your remote is unpaired from your TV. This will sometimes happen unexpectedly when there is a technical issue. By repairing your Bluetooth remote with your Kodak TV, you can make your remote work again. You can easily pair your Kodak remote with your TV by pressing the Volume up and Volume down buttons simultaneously for 5 seconds.

Reset the Kodak TV Remote

If some of the buttons on the remote are unresponsive or if your remote battery drains frequently, you can fix it by resetting the Kodak TV remote. Resetting also fixes the slow responsiveness of the Kodak TV remote.

1. Grab the Kodak TV remote and remove its batteries.

2. Press the Power button on the Kodak TV remote for 3 seconds continuously to drain the residual power.

3. Wait for a minute and reinsert the batteries correctly by looking at the positive and negative polarities.

Further, check if the Kodak TV remote works fine. If not, try the next method.

Verify the Remote’s IR Emitter

If you are facing issues even after resetting the Kodak TV remote, there is a possibility that the IR emitter on your remote might be damaged. This might usually happen when you accidentally drop your remote. You can easily find out whether the IR emitter is damaged or not using your phone’s camera app.

Run the camera app on your mobile and point your remote’s IR emitter to face the camera. Then, press the Power button on the remote and check whether the flashlight can be seen through the camera app. If not, the remote’s IR emitter is damaged, and you need to take the remote to the service center for repair.

Reach Out to Kodak Customer Support

If none of these troubleshooting techniques rectify the Kodak TV remote not working issue, then it’s time to contact Kodak customer support. You can go to the official support page of Kodak and fill out the form regarding your issue. You can also chat with the chatbot on its support page or mail your query to [email protected].

If you need an instant solution, you can directly talk to Kodak’s customer support executive by dialing +919711088885. The executive will evaluate the remote issues over the call and tell you what they can do. If your remote is in the active warranty period, you can get a replacement remote at no charge.

Alternatives for Kodak TV Remote

If you have ordered a Kodak TV replacement remote, it will usually take a few days to reach you. Until then, use these remote alternatives to control your Kodak TV.

• Use a Keyboard or Mouse: If you have a keyboard or mouse in your home, you can use it to control your Kodak TV and execute operations. You can directly connect the keyboard or mouse to the USB port at the back of the Kodak TV. If a mouse is connected, a cursor icon will be displayed on the Kodak TV screen, and you can use it to select the options. On the other hand, if you connect a keyboard to your TV, you can use the arrow keys to control your TV.
• Use the Google TV app: Kodak TV comes with Android and Google OS, so you can use the Google TV app to control it. You can add the Google TV app on an Android or iPhone from the respective app stores. Once you install the app, you have to pair the Kodak TV with the app.

Frequently Asked Questions