If the Logik TV remote is not working with button presses, it is the right time to troubleshoot it. Unless the Logik TV remote has physical damage, you can swiftly fix the issue with some techniques. This article outlines all possible fixes and explains what you should do to return the Logik TV remote’s original functionality.
Before learning the solutions, you must know what causes the Logik TV remote not to work. This will help you prevent the remote issue from happening again.
| Problems | Reasons | Solutions |
|---|---|---|
| The Logik TV remote is fully unresponsive | The remote batteries are drained | Replace the remote batteries |
| The Logik TV won’t receive the remote signal | Glitches on the Logik TV | Power cycle the Logik TV |
| Logik TV responds to the remote only from a particular angle | The presence of blockage objects between the TV and the remote | Remove the obstacles in front of the TV sensor |
| The Logik TV remote keeps unpairing | Unexpected error in the remote | Reset and re-pair the Logik TV remote |
| The Logik TV remote has signs of physical damage | Accidental fall of the TV remote | Buy a replacement remote or repair the faulty components |
Replace the Remote Batteries
The remote can’t operate the Logik TV if its batteries are drained. So, open the remote’s battery compartment lid and replace the old batteries with new 2 AAA batteries in the appropriate polarities. After the battery change, point the remote at the TV sensor and try controlling its functions. If it doesn’t work, try the next fix.
Use the Remote in a Close Range
The ideal functional range of Logik TV remotes is less than 10 meters. If the range is exempted, you cannot control your Logik TV with the remote. To know the exact value, refer to your Logik TV’s user manual. After knowing it, stand within the appropriate range and try controlling the Logik TV. If your TV still doesn’t respond, move to the next fix.
Remove the Obstructions
The basic requirement for proper remote functioning is that the TV should receive signals from it. If an object blocks the Logik TV sensor, it won’t receive inputs from the remote. So, remove the objects that interrupt the signal flow. Also, relocate Bluetooth devices, baby monitors, and other IR-emitting objects from the remote path. After that, point the remote and try controlling the Logik TV. If the problem persists in the remote, it may be due to dust accumulation.
Clean the Logik TV Remote
After removing the obstructing objects, if the remote signals get blocked, you should clean the IR sensor. The floating tiny particles may settle on the remote sensor, resulting in a signal block. So, pick a soft cloth and gently wipe all dust.
Also, clean the remote’s buttons gaps as the dust may deposit on the buttons and make them stuck. To do this, dismantle the remote’s upper shell and clean the button gaps to release the stuck buttons. Then, press any button on the remote. If the Logik TV remote is still not working, try the next method.
Power Cycle the Logik TV
Sometimes, the TV may not properly receive the remote’s commands or respond to the remote. This may happen because of excessive cache accumulation on the Logik TV. You can power cycle the Logik TV to resolve it.
- Turn Off the Logik TV by pressing the panel Power button.
- Eject the Logik TV cord from the wall socket.
- Wait for a few minutes to drain the residual power.
- Plug the Logik TV cord back into the electric socket.
- Turn On the Logik TV by pressing the same Power button.
Once the Logik TV reboots, press the remote buttons and check if it responds to the commands. If the Logik TV remote is still not working, try the next fix.
Pair the Remote with the Logik TV
At times, the remote may automatically unpair from the Logik TV. This may happen if the distance between the TV and the remote is very long. Keep the remote closer to the Logik TV and repair the remote to rectify the issue.
- Pair Logik Android TV remote – Turn on the Logik TV, and you will see a pairing prompt (will appear if the remote is unpaired) → Hold the Home and Left buttons on the remote → Select your remote → Press the OK button and the remote will pair.
- Pair Logik Roku TV remote – After turning on the Logik TV, pick the remote and open the battery compartment lid → Hold the Pairing button → Let go of the button when the remote’s status light blinks → The remote is now paired with the Logik TV.
If the Logik TV remote control still doesn’t work, try the next solution.
Reset the Logik TV Remote
The last solution to bring the Logik TV remote back to work is performing a reset. Doing so will erase the errors from the remote. Also, it will delete the remote’s programming memory. So, it is mandatory to re-pair the Logik TV remote to use it.
- Reset Logik Android TV remote – Turn off the TV and eject its cord from the power source → Plug the TV cord back in after a few minutes → Long-press the Power button on the remote.
- Reset Logik Roku TV remote – Turn Off the TV and remove its cable → Eject the batteries from the remote → After a few minutes, plug the TV cord into a socket → Hold the Pairing button inside the Logik Roku TV remote for 5 seconds.
After resetting the remote, check whether it works well. If it doesn’t work, the problem may be with the Logik TV remote’s IR emitter. Check the status using the next method.
Inspect the Logik TV Remote’s IR Emitter
If the Logik TV remote is not working after trying the above fixes, the issue might be with the remote’s IR emitter. Open the Camera app on your smartphone and bring the remote facing the rear lens. Press the Power button on the remote and see if a light can be seen through the Camera app. If not, the remote’s IR sensor is faulty. So, you should contact Logik TV customer support to repair or replace the remote.
Contact Logik TV Customer Support
You should take the remote to the nearby Logik TV service center or visit its official support website. Explain what kind of issue you have with the Logik TV remote. They will inspect it and tell you whether to replace or repair it. If you clearly know that the remote has been broken, try the remote alternatives to control your Logik TV.
Try These Remote Alternatives
If you prefer not to buy a replacement remote, you can use any of these ways to operate your Logik TV.
- Use Keyboard or Mouse – If you own a keyboard or mouse, connect it to your TV USB port. As a result, a cursor or pointer will appear on the TV screen. Use it to access the functions and operate the Logik TV.
- Use Remote Apps – If you own a Logik Android TV, install the Google TV app (Play Store | App Store) and pair it with the TV. If you own a Logik Roku TV, install The Roku app (Play Store | App Store) on your smartphone and pair it with the TV. Then, use the app to manage the Logik TV functions.
