Sometimes, the Magnavox remote may stop working for a number of reasons. Whether you own a Magnavox TV remote or a universal remote controller, the factors responsible for malfunction can be common. Fortunately, you can try troubleshooting methods to eliminate the Magnavox remote issue and bring it back to a working state.
Knowing the exact cause of the Magnavox remote not working will help identify the exact troubleshooting technique.
| Causes | Reasons | Solutions |
|---|---|---|
| The remote signals get blocked | Blocking objects in the remote’s line of sight | Remove the barriers in front of the TV sensor and the remote |
| Magnavox TV is not responding to the remote commands | Software glitches and residual power in the TV | Power cycle the Magnavox TV |
| Magnavox remote responds very slowly | Low batteries in the remote | Replace the Magnavox remote batteries |
| The remote gets unpaired by itself | Glitches in the remote | Reset the Magnavox remote |
| The remote is completely dysfunctional | Damage to the remote’s hardware components | Repair the Magnavox remote |
Remove the Signal Barriers
For proper TV control, the remote signals should reach the TV receiver. Otherwise, you cannot control the TV using the Magnavox remote. So, ensure your TV’s receiver is not hidden and is visible to the remote’s IR sensor. Also, the signal-blocking objects should be relocated between the TV and the Magnavox remote. If IR-emitting devices are found near your TV, move them away and try controlling the TV.
Use the Magnavox Remote Within the Range
Like other remotes, the Magnavox remote can work within a certain functional limit. Most Magnavox remotes perform and control the TV efficiently if used within 10 meters of the TV. So, stand within 10 meters of your TV and click the Power button on the remote. If the TV doesn’t respond, move a little closer to it and use the remote at a different angle.
Power Cycle the Magnavox TV
Sometimes, the Magnavox TV may not respond to remote commands due to caches, bugs, or residual powers. As a remedy, you can power cycle the Magnavox TV.
- Single press the TV Power button to turn off the Magnavox TV.
- Unplug the Magnavox TV cord from the wall socket.
- Patiently wait for 15-20 seconds for the TV’s residual power to drain.
- Plug the TV cord back into the electric source.
- Hit the TV Power button to turn on the Magnavox TV.
Then, check if the Magnavox remote works fine without trouble.
Clean the Magnavox Remote
For some reason, you may leave the remote in an open space. This will allow the tiny floating particles to settle on the remote buttons or sensor. The accumulated particles will either block the remote signals or button functions. Hence, it is mandatory to clean the remote.
Pick a soft microfibre cloth and dip it inside the remote-cleaning solution. Then, gently wipe the dust from the remote sensor and button gaps. If you can dismantle the remote, remove the remote’s upper shell and clean the dust.
Replace the Magnavox Remote Batteries
The Magnavox remote won’t work properly if the batteries are weak or fully drained. Whenever the remote stops functioning, check the status of your remote batteries. To do this, open the remote’s battery compartment lid and inspect the battery condition.
If the batteries are low, replace them with new 2 AAA batteries. If the old batteries are bulging, clean the battery component before placing the new batteries.
Re-program the Magnavox Remote with TV
Occasionally, the Magnavox TV remote might automatically unpair from the TV. It will unpair due to signal interference or if left unused for several days. Sometimes, if you use a Magnavox universal remote, you might not have programmed it properly. For all these Magnavox remotes, reprogramming is the only solution.
- Pair the Magnavox Roku Remote – Turn on your Magnavox TV → Long-press the Pair button on the remote’s battery compartment → Release the button when the remote’s status button blinks. Thus, the remote pairing is successful.
Meanwhile, if you have a universal remote, you can program it with the respective device using Magnavox universal remote codes.
Reset the Magnavox Remote
The next effective troubleshooting is resetting the Magnavox remote. The procedure for doing so will vary based on the remote type.
- Reset Magnavox Roku TV remote – Turn off the Magnavox TV and remove its cord from the source → Remove the batteries from the remote → After a minute, plug the TV cord back into the source and turn it on → Once the TV logo comes, insert the batteries into the remote → Long-press the Pairing button.
- Reset Magnavox universal remote – Remove the batteries from the remote → Wait for a minute → Insert the batteries back into the Magnavox remote.
Examine the Remote Hardware Parts
If the Magnavox remote is not working even after resetting, then the remote’s parts would have been damaged. To verify this, open the Camera app on your smartphone and point the Magnavox remote towards the Camera. Click the remote Power button. You should see a light on the screen. If not, the remote sensor is broken.
Likewise, press the remaining remote buttons and check whether a light blinks. If not, the remote buttons are also damaged. In that case, buying a replacement remote is a wise choice.
Contact Magnavox Customer Support
After identifying the Magnavox remote is not working due to hardware damage, visit the Magnavox customer service center. The well-trained technician will examine the remote and replace the damaged parts. If you need guidance online, visit the Magnavox support website and ask your query.
Try These Remote Alternatives
Sometimes, the remote repairing process may take more time. Instead of waiting for the remote, you can use these alternatives to control your device.
- Use the Keyboard or Mouse – The Magnavox TVs have a USB port on their back panel. Simply plug the keyboard or mouse dongle into the USB port. Then, using the icon on the TV screen, control your Magnavox TV functions.
- Use Remote Apps—The Magnavox runs on the Roku operating system. So, install the Roku App on your Android or iPhone. After installing the app, pair it with your Magnavox TV. Using the remote icons, you can effortlessly manage the Magnavox TV functions.
