If the yellow light keeps flashing on a TiVo remote, it indicates that it is paired and transmitting RF commands to the DVR. Sometimes, the light may blink for no reason, even if the TiVo remote is unpaired. The reasons for this occurrence are RF signal interference, low batteries, glitches on the DVR box, etc. The following section explains quick solutions to fix the TiVo remote amber light blinking problem.
Remove the Obstructions
The signal path should be clear since the TiVo remote controls or transmits commands to the TiVo through the RF waves. Ensure no objects are blocking the TiVo set-top box and the remote. Also, other DVR devices should be shut down if anything is placed near the TiVo device. This helps the TiVo remote’s RF signals reach the device without interruptions.
Check the Remote Batteries
The TiVo remote light blinks yellow if the remote batteries are low or drained. So, open the TiVo battery compartment lid and check the condition of the batteries. If the batteries are exhausted or bulged, replace them with new 2 AA remote batteries. After inserting the batteries, check whether the yellow light blinks. If the issue persists, move to the next fix.
Force Stop the Blinking Yellow Light
Upon clicking the following buttons on the remote, you can stop the TiVo remote yellow light blinking continuously.
- Click the TiVo + Red V buttons on the remote.
- Release the buttons when the remote’s activity light flashes red.
- Then, click any button on the remote, and the remote light will only blink red, not yellow.
Pair the Remote with the TiVo Device
Sometimes, the remote may get unpaired from your TiVo device due to signal interruptions from other devices. This will cause the remote light to blink yellow continuously. To rectify this, you must re-pair the remote with your TiVo device.
- Click the Live TV button.
- Tap the Clear, Enter, Clear, 221, Clear. The device is now set to the New Pairing Mode.
- Press the TiVo and Back buttons until the remote’s activity light blinks yellow (Amber).
- Click any button on the remote. If it works, the TiVo remote has been paired.
Power Cycle the TiVo Device
Another troubleshooting step is to power cycle the TiVo device. This technique helps to delete the technical glitches on the TiVo device and prevents the TiVo remote from flashing yellow.
- Power off the TiVo device and remove its power cord from the electric socket.
- After 20 seconds, plug the TiVo device power cord back into the socket.
- Turn on the TiVo device and check if the remote works.
Reset the TiVo Remote
The final troubleshooting step is resetting the TiVo remote. After resetting the TiVo remote, you can return it to its default state and fix all the issues. Also, ensure that reserting unpairs the TiVo remote from the TiVo device. So, you have to pair the remote with the TiVo device again after resetting it.
- Long-press the TiVo and TV Power buttons on a remote.
- Let go of the buttons when the remote’s activity light blinks red.
- Hit the Thumbs down button on the remote thrice.
- Tap the Enter button, and the remote’s activity light will blink red thrice.
The TiVo remote has been reset successfully. If you still have an issue, try the next method.
Contact TiVo Customer Service
If none of the above-discussed solutions work, don’t fret. Perhaps the remote has become faulty due to hardware malfunction. Hence, you can seek assistance from TiVo customer support or visit the nearest remote service center. They will disassemble and repair the remote if there is a minor defect. You can also check the TiVo community webpage and ask questions directly using the chat option.
Try These Remote Alternatives
If you have given your remote for repair or ordered a replacement, you can control your TiVo device using these alternatives.
- Use the TiVo buttons – The TiVo set-top box has dedicated buttons for information, number, volume, and power. By pressing these physical buttons, you can control your TiVo device without trouble.
- Use the TiVo remote app – TiVo devices can also respond to the remote app commands. Get the TiVo remote app on your Android or iPhone and pair it with your device. Then, you can control the TiVo set-top box using the remote app.
FAQ
It indicates that your TiVo remote has successfully paired with a DVR and is ready to send IR commands.
