Does your JVC remote malfunction? worry not. The JVC TV remote not working is a common issue faced by many users. This issue may arise due to insufficient battery power, sensor problems, pairing issues, etc. However, this article is enriched with the best working solutions to troubleshoot the remote issue. After going through the upcoming sections, you can fix the JVC remote yourself.
Before proceeding to the solutions, it is necessary to determine the cause of the JVC TV remote not working issue. The primary reasons for the remote problem are given below.
Problems | Reasons | Fixes |
---|---|---|
Battery Issue | Battery with low power or drained completely | Replace the old batteries with new ones |
Pairing Issue | Remote might have unpaired | Pair the remote back to the JVC TV |
Remote Button Stuck | Accumulation of Dust particles | Clean the remote |
Remote Malfunctioning | A glitch in the remote | Reset the JVC remote |
Sensor or hardware issue | Damage in components of the remote | Contact JVC support or replace the remote |
Change the Batteries
Batteries are the pulse component of the remote, and they play a vital role in providing the power supply. If the batteries in the remote are at low charge or drained, it cannot properly convey signals or control the TV. So, ensure that your remote’s battery is at full power. If the old battery seems to be drained, replace it with a new one. Also, make sure to place the batteries in the appropriate position.
Remove Signal Obstructions
For seamlessly controlling the TV using the remote, the signal path should be clear. The presence of objects near the TV receiver may block the signals emitted from the remote. So, ensure that there are no big blocking objects between your JVC TV and the remote. If found, remove those objects and try controlling the TV.
Clean the JVC Remote and its Buttons
As people leave the remote in the open space, there is an increased chance for accumulation of tiny or dust particles in the IR emitter or buttons. These deposited particles may disrupt the connection between the JVC TV and the remote. In this scenario, if you attempt to access your TV using the remote, the TV may fail to respond as the signals from the remote would not reach the TV.
These dust and derbies accumulate not only on the remote sensor but also between the gaps in the buttons and the remote frame. This may cause the button to be stuck or not to respond. To fix this, pick a clean, soft cloth, and wipe all the dust particles from the remote sensor & buttons to fix the problem.
Check Whether the Remote is Paired with the TV
In rare cases, the JVC TV might automatically unpair the remote. If you use a disconnected or unpaired remote, you cannot control your TV. To rectify this, you have to re-pair your remote back to the JVC TV.
JVC Fire TV Remote
- Open Settings on your TV and click the Controller & Bluetooth Devices option.
- Select the Amazon Fire TV Remotes option and tap Add New Remote.
- Hold the Home button on the remote which you want to pair.
- From the list, select your remote and pair.
Pair JVC Roku TV Remote
- If you have a Roku basic remote, simultaneously hold the Back and Home buttons. Once the light flashes, release the button to pair the remote.
- If you have a remote with the pairing button, press and hold the pairing button and release it when the light flashes to pair the remote.
JVC Android TV Remote
- Hit the Home button on the remote.
- On the TV screen, choose Settings and select Remote & accessories.
- Click Add Accessory. After certain seconds, hold the Enter and Volume buttons until you see a light flashing.
- Select your remote on the screen to pair it, and the light will stop flashing.
Pair JVC Google TV Remote
- When the pairing prompt appears on your screen, hold the Home and OK buttons together.
- You can see a pairing symbol on the screen. Once you pair back the remote, check whether the remote is now controlling your TV.
Reset JVC Remote
Resetting the remote is an effective troubleshooting technique. In this process, the remote will be completely set free from crashes or technical issues. Also, note that during the resetting process, the remote will be unpaired from the JVC TV. So, after the resetting process, you have to pair the remote back to the TV. To reset, refer to the steps below.
- Unplug the TV from the power cord.
- Remove the batteries from the remote. Hold the Home or Power button. For JVC Fire TV, press the Left, Menu, and Back buttons.
- While holding the button, insert the batteries into the remote. Plug the power cord into the TV and turn on the TV.
- Finally, press the Home button or Pairing button on the remote to pair it with your TV.
Contact Customer Support
Even after performing the remote reset, if the problems persist, the issue might be due to damage to the hardware parts or board. In this case, you have to seek JVC customer support or visit the nearby service center to repair or replace the remote. You can reach JVC support through their website and raise a complaint regarding your remote.
Walkarounds to Control the JVC TV if the Remote Fails to Function
If you have given your master remote at service centers or have ordered a new remote, you can utilize the following ways to control your JVC TV until the original remote arrives.
- JVC Remote Apps – Luckily, you can control the TV with the help of remote apps on your phone. Get the JVC TV remote app on your smartphone. Then, connect your JVC TV to WiFi, which should be identical to your iPhone or Android. Finally, pair the remote app to the TV and start controlling the TV from the couch.
- Universal Remote – If your JVC remote is entirely dead, you can use the universal remote. These universal remotes can perform all the functions that a JVC original remote can do. Pair the universal remote to the TV using the remote codes and control your TV.
FAQ
Fix the unresponsive JVC TV remote by replacing the old batteries, re-pairing the remote back to the TV, or resetting the remote.
The JVC TV remote is not working due to the pairing issues between the remote and the TV. Check whether you have paired the JVC remote properly. Or else, unpair the and re-pair the remote back to the TV.