If the Kogan TV remote is not working, the best choice is to use a universal remote as a substitute. After purchasing the best universal remote for your Kogan TV, you must program the remote using codes to control it. Here, we have listed all remote codes for Kogan TV and detailed steps to program the remote.
List of Universal Remote Codes for Kogan TV
The 4 and 5-digit remote codes for your Kogan TV to program the universal remote are as follows.
GE
| 4 Digit Codes |
|---|
| 6571 |
One For All
| 4 Digit Codes |
|---|
| 3973, 2888, 3582, 3434, 3189, 3528, 4291, 3572, 3505, 3296 |
Philips
| 4 Digit Codes | 5 Digit Codes |
|---|---|
| 6571 | 10565, 11046, 13036, 10663, 10764, 13773, 10862 |
Steps to Connect Universal Remote to Kogan TV
There are three methods to program a universal remote to Kogan TV, which are as follows.
Manual Code Entry
1. Identify the remote codes for your Kogan TV by checking the universal remote’s user manual.
2. Press the TV button on your universal remote. The remote’s status light will blink, indicating that the remote is in TV mode.
3. Long-press the SET button on the remote for 5 seconds. The menu on your remote’s configuration will change from TV to CODE-accepting mode.
4. Then, tap the OK button on your remote to enter the Setup menu.
5. Now, enter the first four-digit code for your Kogan TV from the remote codes list. The Setup menu on the remote will return to the Code menu if the code you have entered is valid. You can also confirm that your code is valid after hearing a single beep sound. If the code is invalid, you will hear a beep sound 3 times.
6. Tap the Exit button to save the code and exit the programming mode.
7. Press all the buttons on the universal remote except the SET and equipment key to check whether all the functions are working properly. You can start operating your TV if the buttons are functioning properly. If not, repeat the procedure from the beginning using a different code.
Manual Code Search
1. Point the Kogan universal remote towards your TV and press the TV key to switch the remote to TV mode.
2. Press and hold the SET key for 5 seconds until it displays CODE on the remote screen.
3. Now, press the 
key to display the SEARCH menu on the screen and tap OK. Now, the screen on your Kogan universal remote will flash MANUAL.
4. Press the OK button again, and the CODE menu will flash on the screen.
5. Then, aim the remote towards your TV and press the Temp Up for a few seconds until the screen shows VOLUME. Tap OK to change the remote to the MANUAL state.
6. Now, check whether all the keys are working properly by pressing all the buttons except Temp Up, Temp Down, EXIT, SET, equipment key, and confirm key.
7. If all the keys are working properly, press EXIT to move to the SEARCH menu and press EXIT once again to exit the programming mode. You can now start using your remote to control your Kogan TV. If not, repeat the steps from the beginning.
Auto Code Search
1. Press the TV button on your Kogan universal remote by aiming the remote towards the TV.
2. Tap the SET key on your remote for 5 seconds, and the remote will display the CODE menu. Press the key to enter the SEARCH menu and tap OK. Now, the remote screen will flash MANUAL.
3. Hit the Temp Up button once, and the remote screen will display AUTO.
4. Allow your remote to enter the Automatic Search Mode by pressing the OK button. You can use Temp Up to move to the previous code and Temp Down to move to the next code.
5. Press the OK button on your Kogan remote if your TV turns off. Check whether all the buttons are functioning properly. If everything works well, press EXIT to go to the SEARCH mode and tap EXIT again to exit the programming process.
FAQ
The programming steps mentioned here are only for the Kogan universal remote. If you use a universal remote from another brand, refer to its manual for the exact steps.
