Did you buy a universal remote? If so, programming a universal remote with your JVC TV is easy with the correct codes. Whether you need a code in 3, 4, or 5-digit, you will find the comprehensive list here of any universal remote brand. Let’s dive into the section to learn the list of remote codes, including instructions for setting up a universal remote.
List of Remote Codes for JVC TV
The remote codes for JVC TV are available in 3, 4, and 5-digits. Here, we have tabulated those codes for Comcast, GE, RCA, Dish, Philips, One For All, Spectrum, DirecTV, and U-verse universal remotes.
| Code Format | Remote Codes |
|---|---|
| 3 Digit | 817, 812, 738, 737, 736, 735, 705, 701, 668, 655, 651, 649, 645, 642, 639, 601, 581, 570, 560, 559, 557, 535, 533, 517, 508, 406, 405, 404, 398, 387, 268, 247, 242, 236, 235, 233, 231, 229, 227, 210, 209, 199, 197, 196, 195, 190, 189, 182, 169, 164, 160, 159, 158, 157, 121, 106, 105, 104, 094, 091, 089, 083, 082, 081, 080, 069, 067, 066, 065, 063, 060, 055, 054, 053, 048, 045, 041, 040, 039, 038, 037, 036, 034, 031, 030, 026, 024, 023, 014, 013, 012, 008, 001 |
| 4 Digit | 6271, 6171, 5781, 5449, 5281, 5199, 5182, 5170, 5139, 5076, 5071, 5052, 5019, 5018, 5017, 5010, 4704, 4398, 4367, 4340, 4280, 4244, 4201, 4149, 4121, 4107, 4105, 4071, 4070, 4053, 4024, 3983, 3874, 3854, 3841, 3802, 3798, 3797, 3793, 3779, 3719, 3697, 3650, 3649, 3572, 3432, 3393, 3296, 3183, 3175, 3047, 2891, 2751, 2714, 2676, 2511, 2434, 2381, 2360, 2321, 2271, 2264, 2118, 2051, 2049, 2005, 1923, 1911, 1892, 1818, 1801, 1795, 1774, 1756, 1741, 1718, 1670, 1659, 1653, 1633, 1601, 1570, 1524, 1507, 1481, 1480, 1377, 1368, 1346, 1302, 1281, 1253, 1236, 1228, 1227, 1204, 1189, 1169, 1163, 1131, 1130, 1125, 1113, 1112, 1111, 1098, 1092, 1065, 1063, 1062, 1060, 1058, 1056, 1055, 1054, 1053, 1052, 1051, 1049, 1048, 1045, 1042, 1040, 1037, 1029, 1028, 1027, 1024, 1023, 1013, 1012, 1011, 1010, 1009, 1008, 1005, 0941, 0931, 0923, 0901, 0885, 0821, 0771, 0765, 0731, 0709, 0706, 0683, 0680, 0677, 0653, 0650, 0641, 0633, 0631, 0617, 0607, 0606, 0508, 0481, 0463, 0418, 0398, 0371, 0351, 0321, 0311, 0301, 0247, 0245, 0220, 0218, 0204, 0197, 0182, 0178, 0171, 0160, 0141, 0094, 0093, 0081, 0069, 0067, 0065, 0063, 0060, 0057, 0053, 0051, 0036, 0026, 0012 |
| 5 Digit | 19405, 18924, 17415, 15678, 15349, 15241, 15203, 15105, 15004, 14972, 14906, 14852, 14814, 14398, 14273, 14162, 14105, 14061, 14053, 13963, 13854, 13841, 13650, 13393, 13183, 13118, 13061, 12811, 12767, 12434, 12360, 12321, 12282, 12271, 12265, 12264, 12259, 12258, 12051, 12049, 11923, 11892, 11774, 11764, 11756, 11670, 11633, 11602, 11601, 11570, 11568, 11524, 11480, 11352, 11349, 11302, 11253, 10885, 10765, 10758, 10731, 10706, 10683, 10650, 10508, 10463, 10369, 10182, 10169, 10163, 10160, 10156, 10093, 10069, 10060, 10053, 10036 |
How to Program Universal Remote to JVC TV with Code
After identifying remote codes for your JVC TV, follow the below process to program a universal remote with your JVC TV. Insert new powered batteries into the remote and turn on your JVC TV.
Manual Code Entry
1. Pick the remote and single-click the TV button on a universal remote.
2. Locate the Setup button on the remote and hold it.
3. This will make the remote’s LED blink, and the light will remain on.
4. Keep holding the Setup button and type the remote code that matches your JVC TV.
5. The remote’s LED will flash twice if the code is correct.
Note: The light blink may vary for universal remote brands.
6. Aim the universal remote towards the JVC TV and press the Power button.
If your JVC TV turns off, then programming is successful. If not, repeat the process by trying another remote code.
Auto Code Search
1. To begin with, press the universal remote’s TV device/mode button.
2. Hold the Setup button, and the remote’s light will start flashing.
3. Use the remote’s number pad and type 9 9 1.
4. Hold the Power and Channel Up buttons continuously.
5. Let go of the buttons when your JVC TV turns off. This indicates that the remote programming is successful.
How to Program Universal Remote to JVC TV Without Code
If the remote programming fails by entering a code, there is no need to worry. You can still program your universal remote without entering a code in the following steps.
1. Insert the batteries into a universal remote and ensure your JVC TV is turned on.
2. Hold the TV and Select/OK buttons on a universal remote for 5 seconds.
3. Press the Channel Up and Channel Down buttons.
4. Next, continuously hit the Up and Down buttons until your JVC TV turns off.
5. If your JVC TV turns off, the universal remote programming is successful, and the remote is ready to control the JVC TV.
Thus, you can use a universal remote to operate the TV when your JVC TV remote stops working.
FAQ
No. You don’t need to unpair the JVC TV remote from your TV to pair a universal remote.
Yes. You can control your JVC TV using the remote app, keyboard, or mouse or with the TV’s physical buttons.
