If you buy a universal remote for your Thomson TV, knowing its codes is essential to finish programming the remote. The universal remote codes for Thomson TV are available in 3, 4, and 5-digits, which vary according to the remote brand. We have brought you the TV-compatible remote codes for popular universal remotes and explained the remote programming procedure.
List of Universal Remote Codes for Thomson TV
The codes that you can use to program a universal remote with the Thomson TV are tabulated as follows.
Universal Remote Brand | Remote Codes |
---|---|
Comcast | 10209, 10625, 10210, 11365, 12250 |
DirecTV | 11447 |
Dish | 551, 616, 705, 010 |
GE | 5014, 5133 |
One For All | 0625, 3047, 2675, 3649, 4259, 3779, 1682, 1588, 0501, 0560, 3183, 2715, 0109, 0037, 0343, 0556, 0287, 0753, 3971, 0335, 4291, 1447, 2414 |
Philips | 3 Digit: 225, 314, 232, 136, 264, 223 4 Digit: 0587, 0314, 0074, 0223, 0064, 0264, 0652, 0136 5 Digit: 14656, 14754, 17013, 17918, 18114, 18310, 18516, 14254, 14352, 12457, 14450, 14558, 15564, 14466, 12963, 10960, 12251, 11343, 14849, 15662 |
RCA | 4 Digit: 3183, 1447 5 Digit: 11447, 13183 |
Spectrum | 3 Digit: 055, 608, 049 4 Digit: 0491, 0531, 0861, 2881, 1171, 0061, 0211, 0441 5 Digit: 11447 |
U-Verse | 1000, 1383 |
Program Universal Remote to Thomson TV With Code
The steps to program a universal remote with the Thomson TV are almost the same, irrespective of the remote brand. If you are going to use a universal remote for the first time, insert new batteries into it before proceeding further.
Note: Here, we have only mentioned the general programming steps. You can also refer to your universal remote’s user manual to program it.
Manual Code Entry
1. Press the TV key on your universal remote control.
2. Find the Setup button on a universal remote and long-press it for a few seconds. While you press the Setup button, the LED light on your remote lights up.
3. Continue to hold the Setup button and enter the correct remote code that we have listed in the above table.
4. If the remote code that you have entered is correct, the LED light on the remote will flash twice.
5. Then, you can test your remote by pressing the Power or Volume buttons on your remote. If your TV responds, you can continue to use the remote.
6. If your TV doesn’t respond, repeat the process by entering the next remote code.
Automatic Code Search
1. Tap the TV button on a universal remote once you point it towards your Thomson TV.
2. Press the Power and TV buttons simultaneously for a few seconds. Continue to press the buttons until the LED light on your remote turns on and off.
3. Now, you need to press the Play button on a universal remote for about 5 seconds. If your Thomson TV turns off, it means that the universal remote has found the correct remote code. If not, repeat the process again until your remote finds the code for your Thomson TV.
4. If the remote code is identified and your Thomson TV turns off, press the Reverse/Rewind button once to turn your TV on.
5. After it gets turned off, tap the Stop button on a universal remote to save the code.
Now, you can start controlling your Thomson TV using the universal remote.
Program Universal Remote to Thomson TV Without Code
1. Tap the OK/Select and TV buttons simultaneously on a universal remote for a few seconds.
2. Press the Channel Up and Channel Down buttons together for a few seconds.
3. Then, tap the Up and Down navigation buttons for a few seconds. You can release those buttons on your remote when your Thomson TV turns off.
4. If your Thomson TV doesn’t turn off, there is an issue with the programming process. In that case, you can refer to your universal remote’s user manual to check whether you have followed the steps correctly.
FAQ
You might have entered the wrong code, or your remote’s programming steps might be different from what we have given. Read the user manual of your universal remote clearly and pair it with your Thomson TV.
If you own a Thomson universal remote, refer to this PDF file to get the respective codes for the device you want to set up.