If the Spectrum remote fails to control the volume or does not change channels, the best solution is to reset it. Doing so will give the Spectrum remote a fresh start, prevent it from having pairing problems, and ensure proper functioning. However, the procedure for resetting the Spectrum remote will vary based on the model. Here you will learn the steps to do so.
Steps to Reset Common Spectrum Remotes
If you don’t know which Spectrum remote model you’ve been using, try these steps.
1. Hold the TV button on your Spectrum remote.
2. At the same time, hold the OK button on the remote.
3. Release both buttons after a few seconds.
4. As a result, the Mode buttons (TV, AUX, DVD) will start blinking, and the TV button alone will stay lit.
5. Long-press the Delete button for 3-5 seconds. Now, the button will blink and turn off. That’s it. The Spectrum remote reset was successful.
Steps to Reset Spectrum 1060BC2/1060BC3
1. Grab your Spectrum remote and hold the Set Up button.
2. Release the button when the previously chosen button flashes two times.
3. Using the remote’s numeric pad, type 9 8 1.
4. Again, the previously chosen button will flash two times. The light will stop for a second and will flash two times. The remote resetting was successful.
Steps to Reset UR3-SR3M/UR3-SR3S
1. Hold the REC and CBL buttons on your Spectrum remote simultaneously.
2. Release these buttons if the remote light moves right to the left three times. The process will take a maximum of 10 seconds.
The Spectrum remote is now reset.
Steps to Reset URC 2060
1. Grab the Spectrum remote and long-press the Setup button on the remote.
2. Release the Setup button when the Cable Power button blinks two times.
3. Using the Spectrum remote’s number pad, type 9 7 7.
4. If the Cable Power blinks thrice, the remote resetting process is completed.
Steps to Reset Spectrum Atlas OCAP 5/M1056
1. Hold the Setup button on your Spectrum Atlas remote.
2. Release this button when the previously selected device button flashes twice.
3. Type 9 8 0 with the help of the remote’s number pad.
4. As a result, the previously selected device button will flash twice. The button light will stop and again will flash twice. This indicates that the Spectrum Atlas remote has been reset.
Steps to Reset AllTouch AT8560-Rev-A
1. Hold the CBL and Select buttons on your Spectrum remote.
2. Release both buttons if all the Mode buttons on the remote flash twice.
3. Using the remote’s number pad, type 9 8 1. As a result, all Mode buttons will flash thrice.
4. Within a few seconds, the CBL button will flash twice. That’s it. The Spectrum AllTouch remote reset is successful.
Steps to Reset Spectrum UR2-RF-CHD
1. Hold the Program button on your Spectrum remote for 5 seconds.
2. Release the button if the remote’s red power button light turns on.
3. Click the following buttons at the interval of the red button blinks for each click, 9 8 7.
4. Finally, the red Power button on the remote will give two quick flashes indicating that the resetting is successful.
Once you reset the Spectrum remote, the pairing history will be completely erased from the remote. So, you need to program the Spectrum remote to your TV to control it.
FAQ
You can reset the Spectrum cable box to fix the issue. Hold the Reset button on the Spectrum box for five seconds. Unplug the cord and wait for sixty seconds. Plug the cord back in. Once turned on, try pairing the remote and check if it works.
