Shaw remotes have the advantage of being universal. You can program them to control your TV and set-top box together. Whether you own a Shaw Ignite TV remote or a Legacy remote model, the programming is simple with a few clicks using suitable remote codes. Surprisingly, some Shaw remote models can also be programmed without codes. This article will teach you the procedure to program any Shaw remote controller to a TV.
Steps to Program Different Shaw Remote Models to TV
Shaw remote models are available in two categories: Ignite TV remotes and Legacy Shaw remotes. There are eight different remote models, and the following section will cover the programming steps for each model. Keep your TV on and proceed with the steps.
Program Ignite TV Remote XR11
1. Click the TV button on your XR11 remote.
2. Long-press the Setup button until the indicator light changes from red to green.
3. Following it, enter the 9 9 1 code using the numeric buttons.
4. Then, continuously tap the Channel Up button until your TV turns off.
5. When your TV turns off, hit the Setup button.
6. Switch on your TV and check whether your TV responds to the remote.
Program Ignite TV Remote XR15
1. Hit the Power button on your XR15 remote.
2. Concurrently, long-press the A and D buttons until the remote light blinks simultaneously.
3. Input the code 9 9 1 using the remote’s number pad.
4. Then, click the Power button on the remote.
5. Keep pressing the Channel Up button till your TV turns off.
6. Finally, click the A and D buttons to save the code and end the pairing process.
Pair Ignite Streaming Remote
To pair the Ignite Streaming remote to your TV, you must initially program the Ignite Streaming remote to your Ignite box. If you fail to pair the remote to your Ignite box during activation, follow the given steps.
Program Ignite Streaming Remote to Ignite Box
- Go to the Ignite box’s home screen and click the Settings icon.
- Choose the Remote Settings option.
- Then, choose the Voice remote pairing option and follow the on-screen process to pair the remote.
Note: Optionally, hold the Voice Control (mic) button on the remote until you get a pop-up message. Then, follow the on-screen notes to pair the remote to your box.
Pair Ignite Streaming Remote to TV
- With the TV on, aim the remote towards the Ignite box and hold the Voice Control (mic) button on the remote.
- Then, an instruction menu will appear on the screen.
- Follow the on-screen notes to pair the remote to your TV.
Program Ignite Large Button Remote
1. Simultaneously, hold the Mute and Home buttons on the remote for 5-6 seconds.
2. Now, enter the 5-digit remote code. Some possible codes are 10810, 11791, 11913, 12337, 11685, 11712. The remote link will blink green twice if the code is correct and blink once if the inputted code is incorrect.
3. Following it, tap on the Power button, and your TV will turn off.
Pair Legacy Shaw – Gateway Remote
Before pairing the Gateway remote with your TV, you must know the corresponding TV codes by visiting this website.
1. With the TV on, hold the Menu and OK buttons on the Gateway remote until the Power button blinks twice.
2. Use the numeric pad and input the remote code of your TV brand. As a result, the Power button on the remote will blink two times.
3. Now, click on the Power button on the remote, and your TV should turn off. If not, repeat the process.
Program Legacy Shaw – Champ Remote
You can program the Champ remote with your TV in three ways, as listed below.
Auto-code Search
- Long hold the Setup button till the remote light flashes two times.
- Next, click on the TV Power button on the remote.
- Following it, long press the SEL/OK button and keep hold of it.
- If the TV turns off, release the SEL/OK key. This indicates that the remote programming is successful.
One-digit Code
- Hold the Setup button till the remote light flashes two times.
- Then, tap on the TV Power button.
- Long hold the one-digit code of your TV brand.
- Vizio – 0
- Insignia/Dynex – 1
- Zenith/LG – 2
- Mitsubishi – 3
- Panasonic – 4
- Philips/Magnavox – 5
- Samsung – 6
- Sharp – 7
- Sony – 8
- Toshiba – 9
- Release the key if your TV turns off. This means that remote pairing is finished.
Four-digit Code
- Hit the TV Power key on the Shaw remote.
- Hold the Setup button till the remote light flashes two times.
- Then, type the four-digit code of your TV brand. Visit the support website to know your TV remote code.
- Next, click the TV Power button to turn off your TV. If that happens, the remote programming is done.
Pair Legacy Shaw – Champion Remote
Similar to the Champ remote, you can program the Shaw Champion remote with your TV using remote codes.
One-digit Code
- Hold the Setup button on the remote until the Mode button flashes two times.
- Then, click the Mode button until the TV button blinks.
- Long press the one-digit code of your TV brand.
- Vizio – 0
- Insignia/Dynex – 1
- Zenith/LG – 2
- Mitsubishi – 3
- Panasonic – 4
- Philips/Magnavox – 5
- Samsung – 6
- Sharp – 7
- Sony – 8
- Toshiba – 9
- Release the key if your TV turns off.
Four-digit Code
- Hit the TV mode button on your Champion remote.
- Hold the Setup button till the TV mode button flashes two times.
- Input the four-digit code of your TV brand. To learn your TV brand code, visit this website.
- Tap on the TV Power button, and your TV should turn off. If not, try another remote code.
Program Legacy Shaw – Atlas Remote
You can program your Shaw Atlas remote to your TV by manually entering a code or using Auto-search.
Auto-search Code
- Click the Mode button on the remote till the TV button blinks.
- Hold the Setup key until the Mode key flashes two times.
- Now, input the remote code 9 9 1 using the numeric pad.
- Then, keep pressing the Channel Up button until your TV turns off.
- Hold the Setup button to save the code when your TV turns off. The remote light will flash two times to indicate that the remote pairing is successful.
Four-digit Code
- To start with, click the TV mode button on your Atlas remote.
- Long press the Setup button until the TV button flashes two times.
- Input the four-digit code of your TV brand. Get your Atlas remote code for your TV by referring to this webpage.
- Following it, hit the Power button on the remote, and your TV should turn off. If not, repeat the process with another code.
Pair Legacy Shaw – Rogers Atlas Remote
The Rogers Atlas remote can be programmed to all TV models by manually entering the four-digit remote code.
Auto-search Code
- Initially, turn on your TV and point the Rogers Atlas remote towards the TV.
- Click the Mode button on your remote until the TV button blinks.
- Hold the Setup button until the Mode button flashes two times.
- Then, input the code 9 9 1 using the number pad.
- Continuously click the Channel Up button till your TV turns off.
- At last, hold the Setup button to save the code.
Four-digit Code
- Click on the TV mode button on the Rogers Atlas remote.
- Hold the Setup button till the TV mode button flashes two times.
- Now, input the four-digit remote code of your TV brand. Get your TV remote code here.
- Hit the Power button on the remote, and your TV should turn off. If it doesn’t work, try inputting another remote code.
Program the Shaw Transport Remote
Initially, power on your TV and press the following buttons on your Transport remote.
Auto-code Search
- Long press the SET button on the Transport remote until the red light blinks two times.
- Then, input the code 9 9 1 using the remote numeric pad.
- Keep pressing the Channel Up button till your TV turns off.
- When your TV powers off, click on the SET button to save the code.
Four-digit Code
- Hold the SET button on the remote till a red light blinks two times.
- Input your TV brand’s four-digit code, and a red light will blink twice. Visit this website to learn about your TV brand’s remote code.
- Then, click the Power button, and your TV should turn off.
- Turn on your TV and check whether your TV responds to the Shaw Transport remote.
Pair Shaw Direct Remote
Switch on the TV to which you want to program the Shaw Direct remote (IRC600) and follow the process.
Auto-code Search
- Press the TV key on the remote until the AUX and SAT keys blink thrice.
- Next, input the code 9 9 1 using the number pad.
- Then, keep pressing the Chanel Up button till your TV turns off.
- Once your TV turns off, click the Enter/OK button.
- Now, hit the Power button, and your TV will turn on.
Five-digit Code
- Hold the TV key on the Shaw Direct remote until the SAT and AUX keys blink three to four times.
- Enter the five-digit remote code on your Shaw Direct remote. Visit this webpage to find out the correct code for your TV brand.
- Now, click the Power button, and your TV should turn off.
- Finally, hit the Power button to turn on your TV.
FAQ
Initially, pair the Shaw remote controller with your TV. Then, press the Power button on the remote to turn on your TV. Once your TV turns on, click the Volume Up or Down key to manage volume settings.
Refer to the user manual that is offered with your Shaw remote. Otherwise, go through the above-mentioned guidelines to program your Shaw remote to your Samsung TV.
