If you have a Fios remote, you can easily control your Fios set-top box and TV set at a time. To get started, you have to program your Fios remote with your TV. The Fios remotes can be programmed to any TV model with or without remote codes. This article offers complete instructions for programming the Fios remote to any TV model.
Steps to Program Fios Remote Controller to Any TV
The Fios remote is available in 7 different models, and the remote programming steps vary for each remote model, as explained below.
Program Fios TV Voice Remote
Fios Voice Remote can automatically pair with the Fios set-top box. If it doesn’t get paired, you can manually pair it by pressing the remote shortcut keys.
Pair the Fios TV Voice Remote to the Fios Set-top box
- Connect the Fios set-top box to your TV and turn on both devices.
- Concurrently hold the Pause/Play and O buttons till a blue light blinks on the remote.
- Once the blue light stops, you can start controlling your Fios set-top box.
Pair the Fios Voice Remote to the Fios Set-top box connected TV (Automatic)
- Open the home screen of the Fios set-top box and select the Menu option.
- Click Settings and choose the Voice Control.
- Select Fios TV Voice Remote and then select Program Voice Remote.
- Click on the Automatic Setup option. The remote pairing process will start.
- Once paired, you can see the Success message on the screen.
Program the Fios Remote to the TV Manually
- Launch the Menu and open the Fios Settings.
- Select the Voice control and choose the Fios TV Voice Remote.
- Click on the Program Voice Remote option and select Manual Setup.
- Pick your TV brand and follow the on-screen instructions.
- In the end, you can see a Success message on the screen.
Program Fios Verizon P265 Remote
You can pair the Fios Verizon remote to your TV by manually inputting the code or using the auto-code search method.
Auto-code Search
- Hold the OK and FiOS TV buttons on the remote.
- Let go of the buttons. A red light will flash two times and keep glowing.
- Keep pressing the Play/Pause key once every second until the remote finds the valid remote code and your TV turns off.
- Release the Play/Pause key if the TV gets turned off.
- Click the TV Power button to turn on your TV.
- Finally, hit the OK key on the P265 remote to save the code.
Three-digit Code
- Simultaneously, hold the O and OK keys on the remote. A red light will flash thrice and remain on.
- Input the three-digit code of your TV brand. Again the red light will flash two times and remain on. Get the remote code for your TV brand by visiting this website.
- Continuously press the Channel Up button till your TV turns off.
- Now, press the TV Power button, and your TV will turn on.
- Test whether your TV responds to the Fios Verizon remote by pressing the mute or volume buttons.
- If your TV responds, hit the OK button to save the code. The remote indicator light will flash thrice, which indicates that the remote is all set to control your TV.
Fios Philips RC1445302 Remote
To begin, switch on your TV and Fios set-top box. To program the Fios Philips RC1445302 remote to a TV, get your TV brand’s remote code by visiting this webpage.
Auto-Code Search
- Hold the TV button on the remote.
- While holding it, click and hold the OK button for a while.
- Once you release both buttons, the Device button will flash two times.
- Now, enter 9 2 2 using the remote numeric pad.
- Then, click the Play button on the remote.
- Continuously, hit the Fast Forward button till your TV turns off.
- Once your TV turns off, tap the OK button to save the code.
Four-digit Code
- Long press the TV button on the Fios Philips RC1445302 remote.
- While holding it, hit the OK button.
- Let go of both the buttons. As a result, a Device button will flash two times.
- Input the four-digit remote code of your television brand, and the TV button will flash thrice.
- Click the TV Power button, and your TV should turn off.
- At last, tap the OK button to save the code.
Program Fios Verizon P283 Big Button Remote
You can program the Fios Verizon using the three-digit remote codes. Initially, you should note your TV brand’s remote code from this website and follow the process.
Auto-code Search
- Hold the OK and Fios TV buttons for a few seconds. As a result, a red light will flash two times and remain on.
- Following it, keep pressing the Play/Pause button until your TV turns off.
- Now, hit the Power button to turn on your TV.
- Check the remote by clicking the volume or mute buttons.
Three-digit Code
- Together click the O and OK buttons. As a result, a red light will flash two times and remain on.
- Input the three-digit remote code of your TV brand. Again, the red light will flash two times and remain on.
- Keep pressing the Channel Up button till your TV turns off.
- Click on the TV Power button, and your TV will turn on.
- Finally, hit the OK button on the Verizon P283 remote to save the code.
Program Fios Motorola 800 Remote
To pair the Fios Motorola 800 remote, power on your TV and the Fios set-top box.
Auto-code Search
- Hold the TV button button for 6 seconds. As a result, all device buttons will glow at a time, and the TV button will remain on.
- Then, click the Power button, and the Device button will flash thrice.
- Once the light turns off, keep pressing the Up arrow button until your TV shuts down.
- Finally, tap on the OK button to save the code.
Four-digit Code
- Turn on your TV and note down the TV code by visiting this webpage.
- Hold the TV button for 6-7 seconds. Now, all Device buttons will blink, and the TV button light will stay on.
- Input the four-digit code of your TV brand. The Device button on the remote will flash thrice if the code is correct.
- Then, click the Power button on the remote, and your TV should turn on.
Program Fios Atlanta Remote
You can program the Fiso Atlanta remote to your TV by entering the codes or performing the auto code search function.
Auto-code Search
- Hold the SEL and the TV buttons until the Device/Mode button flashes two times.
- Then, input the 9 9 1 using the number pad.
- Now, click the Play button until your TV turns off.
- Once your TV powers off, press the SEL button.
- Tap on the Power button, and the TV should turn on.
- If your TV turns on, hit the SEL button to save the code.
Four-digit Code
- Long hold the Select and TV buttons till all the Device/Mode buttons flash two times.
- Input the four-digit remote code of your TV brand. To know the remote code for your television brand, visit this website.
- Check whether your TV responds to the remote by clicking the volume/Mute or function buttons. If your TV responds to the remote, the pairing is successful.
FAQ
Refer to the above guidelines to program the Fios remote to your Samsung TV with or without a remote code.
If the Fios remote is not working after pairing, check whether its batteries have sufficient charge. If the batteries are low, replace them with new batteries.
