Are you looking forward to controlling your Onn TV using the DirecTV remote? If so, you are here at the right place. The steps to program a DirecTV remote to an Onn TV will differ for each model. This guide explains all the procedures for doing so in detail.
Program DirecTV Gemini Remote to Onn TV
Gemini remotes are available in two models, and the programming steps are the same.
Program Gemini Internet or Satellite Remote to TV
1. Ensure your DirecTV-connected Onn TV is turned on. Press the Home key on the Gemini remote to go to the DirecTV home screen.
2. Following that, navigate to Settings and tap System.
3. Select Remote & Devices and choose Program Your Remote.
4. Select the Onn TV from the list shown. The pairing instructions will appear on the Onn TV screen.
5. Follow the guidelines and pair the remote with your Onn TV
Program DirecTV Genie Remote to Onn TV
Before heading into the steps, turn on your Genie receiver-connected Onn TV.
Automatic Remote Pairing
1. Hold the Mute and Enter buttons on your DirecTV Genie remote.
2. Release both buttons if the remote’s green light flashes 2 times.
3. You can see a message saying “Applying IR/RF Setup” on the DirecTV screen.
4. Then, tap the Menu button on a Genie remote.
5. Go to Settings and choose the Remote Control option.
6. Click the Program Remote option and select your Onn TV.
7. Follow the pairing instructions on the Onn TV screen and set up your Genie remote.
RF Pairing Method
1. Hold the Mute and Select buttons on your Genie remote for a few seconds.
2. Release both buttons when the Genie remote’s green light blinks twice.
3. Press the 9 6 1 buttons using the remote’s number pad.
4. Click the Channel Up button. Then, hit the Enter button.
5. A message saying”Your remote is now setup for RF” will appear on the DirecTV-connected Onn TV screen.
6. Further, go to Settings → Remote Control → Program Remote → TV.
7. Then, follow the on-screen steps to finish programming it with your Onn TV.
Program DirecTV Universal Remote to Onn TV
Using the 5-digit remote code, you can quickly program a universal remote with your Onn TV. Turn on your DirecTV-connected Onn TV and continue with the steps.
1. Tap the Menu button on a DirecTV universal remote.
2. Go to the DirecTV HD receiver Settings and select Remote Control. If you use a DirecTV SD receiver, go to Parental Favs & Setup → System Setup → Remote or Remote Control.
3. On the next page on the screen, choose the Program Remote option.
4. Pick your Onn TV from the list.
5. Type the 5-digit remote code using the remote’s number pad. Visit this website to find the remote code for your Onn TV.
6. The instructions will now appear on the Onn TV screen. Use them to finish the remote pairing process.
Program DirecTV RC60, RC32, RC24 Remote to Onn TV
You can pair the DirecTV RC60, 32, and 24 model remotes with your Onn TV with manual codes or auto-code search.
Manual Code Entry
1. Toggle the remote’s Mode button to the TV button side.
2. Long-press the Mute and Select buttons on the remote.
3. Release the buttons when the remote’s TV button light changes to green.
4. Enter the 5-digit remote code of your Onn TV.
- 5-digit remote codes – 11756, 10885, 12434, 10706, 10463, 12049, 10047
5. The remote light will flash green twice if the code matches.
6. Hit the Power button on the remote, and your Onn TV will turn off. Thus, the pairing is successful.
Auto Code Search
1. Toggle the remote’s Mode button and switch it to the TV mode.
2. Hold the Mute and Select buttons on your DirecTV remote.
3. Release the buttons when the remote’s TV button light changes to green.
4. Using the remote’s number pad type, 9 9 1.
5. Hit the Power button on your DirecTV remote.
6. Continually press the Channel Up button on the remote.
7. Stop pressing the key when your Onn TV turns off.
FAQ
Yes. Programming the DirecTV RC60, RC32, and RC24 remotes to Onn TV is possible without a receiver. Other DirecTV remotes require a receiver to program with a TV.
