Pairing a Bell Remote to your TV is an added advantage, as it enables you to control your TV in place of the master remote. All you need to do is program the Bell Remote to your TV with the corresponding remote codes. Whether you own a Bell Satellite TV, Fibe TV Slim, or MTS TV remote, you can quickly set it up with your TV by following the below instructions.
Steps to Pair Bell Satellite Remote to TV
To start with, power on your TV and Receiver. Now, point the Bell Satellite remote at your TV and proceed with the steps.
1. On the Satellite remote, locate the TV button and long-press it.
2. Once you press, the SAT, VCR, and AUX buttons will light up and off.
3. Then, release the TV button on the remote. Now, the button will blink up.
4. Following it, enter the remote code corresponding to your TV model.
Below are the remote codes for popular brands. Visit this website to learn all TV codes.
| TV Brand | Remote Codes |
|---|---|
| Sharp | 521, 526, 585, 606, 607, 628, 629, 652, 654, 655, 658, 739, 740, 741, 777, 794, 803, 835, 836, 898, 913 |
| Panasonic | 509, 644, 651, 662, 676, 685, 698, 700. 716, 761, 765, 780, 784, 811, 820, 821, 822, 867, 868, 869, 508, 870, 871, 872, 873, 874, 876, 878, 512, 880, 689, 881, 882, 883, 885, 885, 886, 889, 890, 900, 566, 819, 879, 734, 823, 875, 884, 877 |
| Samsung TV | 506, 516, 566, 612, 627, 647, 653, 654, 897, 656 658, 680, 704, 573, 717, 730, 523, 738, 755, 833, 505, 858, 655, 526, 652, |
| Vizio | 766 |
| RCA | 691, 863, 505, 651, 776, 548, 633, 636, 641, 645, 648, 650, 653, 656, 698, 701, 654, 708, 634, 716, 725, 742, 749, 652, 805, 630, 830, 831, 832, 864, 503, 646, 715, |
| Toshiba | 516, 590, 617, 631, 635, 680, 683, 688, 750, 771, 785, 793, 847, 848, 849, 850, 851, 852, 853, 854, 855, 856, 865, 866, 909 |
| Philips | 525, 566, 651, 652, 656, 723, 724, 729, 770, 782, 824, 835, 826, 827, 828, 891, 892, 893, 894 |
| Sanyo | 542, 590, 652, 683 |
| Emerson | 683, 699, 534, 541, 573, 627, 642, 648, 652, 536, 654, 657, 658, 662, 682, 692, 590, 696, 720, 636, 816, 526, 655, |
| LG | 653, 766 |
| Infinity | 566 |
| Sony | 500, 640, 690, 758, 781, 795, 796, 797, 798, 806, 807, 808, 810, 837, 838, 839, 840, 841, 842, 843, 844, 845 |
| JVC | 508, 557, 559, 642, 649, 655, 676, 726, 735, 736, 737, 812, 817 |
| Hisense | 759 |
| Thompson | 709 |
5. Next, click on the # symbol button. Once you click, the TV button on the remote will flash thrice.
6. You can start controlling your TV using the satellite remote. To check it, turn off or turn on your TV by pressing the Power button on the Bell remote.
Steps to Program Bell Slim Remote to TV
If you want to control your TV using the Bell slim remote 9500, 7500, or 6500 models, refer to the steps below.
1. After powering up both the TV and receiver, point the Slim remote towards the TV.
2. Long-press the Options button until a green light flashes twice near the Power button.
3. Once the light flashes, input the remote code using the remote number buttons.
Only popular TV brand codes are tabulated below. Visit this page to view the codes for all TV brands.
| TV Brands | Remote Code |
|---|---|
| To search All brands | 0001 |
| Insignia | 0010 |
| Vizio | 0011 |
| RCA | 0012 |
| Sanyo | 0013 |
| Panasonic | 0014 |
| Emerson | 0015 |
| Sharp | 0016 |
| LG | 0017 |
| Toshiba | 0018 |
| Sony | 0019 |
| Samsung | 0020 |
| Philips | 0021 |
4. Now, the green light will blink twice, ensuring the input code is correct.
5. Following the light blinking, long hold the Power button till your TV powers off. (Sometimes the TV takes a long time to turn off, as the remote cycles the code, and this process may extend up to 15 minutes).
6. When the TV turns off, click on the Select button. That’s it. The remote is now synced with your TV. At last, hit the power button to turn on the TV back and start controlling.
Steps to Program Bell MTS TV Remote
There are four ways to program the Bell MTS TV remote, which are as follows.
Using TV Brand Code
1. Hold the SETUP or LEARN key until the mode button starts to blink twice.
2. There will be three mode keys. Since you need to program the remote to the TV, we need to press the TV key. This key on the MTS TV remote will remain idle.
3. Find the number key assigned for your TV by referring to the table.
| Remote Control Number Key | TV Brands |
|---|---|
| 1 | Insignia/Dynex |
| 2 | LG |
| 3 | Mitsubishi |
| 4 | Panasonic |
| 5 | Philips/Magnavox |
| 6 | Samsung |
| 7 | Sharp |
| 8 | Sony |
| 9 | Toshiba |
| 0 | Vizio |
4. Hold the respective number key and release it if your TV turns off. As a pairing confirmation, the TV key will blink twice.
Using Direct Code Entry
1. Ensure your TV is turned on. Open this PDF file on your phone and note the 4-digit code allocated for your TV.
2. Press the TV key once on the MTS TV remote. Then, hold the SETUP or LEARN key until the selected TV key flashes twice.
3. Within ten seconds, you need to enter the first code for your TV, which you noted earlier from the PDF file.
4. Tap the POWER key on the MTS remote to check if it works. If your TV turns off, the remote setup is complete.
If the setup fails, repeat the steps 2-4 with the next code assigned for your TV.
Using Code Search
1. Hold the SETUP or LEARN key on the MTS TV remote until all mode keys blink twice.
2. Press the TV key on the remote, and it will remain idle.
3. Press and hold the OK key to perform a code search. The process will take a long time to identify the code, so you need to be patient.
4. Release the OK key if the TV turns off successfully.
Using Learning Mode
If you have an existing TV remote, you can copy functions from it using the Learning feature on the MTS TV remote.
1. Point your Bell MTS TV remote one to two inches away from the TV remote. Ensure the remote’s IR emitter is pointing to each other.
2. Hold the SETUP or LEARN key on the MTS TV remote until the LED flashes twice.
3. Press the number 975 in sequence using the remote’s number pad.
4. Press the TV key, then the respective key on the Bell MTS TV remote that you want to teach.
5. Hold the desired key on the teaching remote until the TV key on the Bell MTS TV remote flashes twice.
6. Similarly, you can learn other keys from the original TV remote. To exit the learning mode, hold the LEARN until the mode key starts to pulse twice.
How to Program Bell Remote to TV Without Codes
Well, if you find it difficult to pair the Bell remote with codes, you can use the automatic code search method to pair it. In this method, the receiver does not need to be turned on. However, your TV should be powered on.
1. Pick the remote and long-press the TV button until the SAT, VCR, and AUX buttons light up.
2. Then, hit the Power button, and the red TV button will blink.
3. Following it, keep pressing the Up Arrow button till your TV turns off. Note that your TV may take up to 5 minutes to turn off.
4. Once your TV turns off, hit the Pound(#) button. The TV button on your remote will now flash thrice, indicating that the remote is programmed with your TV.
5. Then, click the Power button, and your TV will turn on. Click all the buttons on the remote to check whether the TV responds.
FAQ
No. You don’t need to program the Bell Fibe TV remote to the receiver.
The problem might be due to the issues with the remote batteries, or the remote might have been unpaired.
Initially, program the Bell remote to your TV with or without the codes using the steps above. Once connected successfully, you can control the volume of your TV using the Bell remote controller.
