In some circumstances, the properly working Blaupunkt TV remote may fall prey to issues. If you wonder why the Blaupunkt TV remote is not working, weak batteries, jammed buttons, and signal interference can be the primary reasons. You can fix such issues by trying some workarounds. This article is a pocket guide to fix all kinds of Blaupunkt TV remote problems.
The table below lists the primary causes behind the Blaupunkt TV remote issue. Read the solutions clearly to diagnose the problem quickly.
| Issues | Reasons | Solutions |
|---|---|---|
| Blaupunkt TV responds only after multiple remote button presses | The remote may be operated from a long-range | Use the Blaupunkt TV remote in a short-range |
| The remote signal gets obstructed | The presence of blocking objects in the remote’s line of sight | Relocate the blocking objects |
| Blaupunkt TV is not responding to remote | Power fluctuations in the TV | Power cycle the Blaupunkt TV |
| The remote has slow responsiveness | The remote batteries may be weak or completely drained | Insert new batteries into the remote |
| The remote buttons may be stuck | Accumulation of dust and debris on the remote | Clean the Blaupunkt TV remote |
| The remote has visible signs of damage | Internal components on the remote may be faulty due to an accidental fall | Repair or replace the remote |
Use the Blaupunkt TV Remote in a Short Range
Whether you own an IR or Bluetooth-connected Blaupunkt TV remote, you must use it within a working range. Your Blaupunkt TV can receive a signal only if the remote is fewer than 30 feet from the TV sensor. So, keep your remote within this range and press any button on the remote. If your TV does not respond, try the next fix.
Remove the IR Signal Barriers
Sometimes, you may not notice objects that are right in front of the remote and the TV. They may block the remote signals and prevent them from reaching the TV sensor. Hence, you should relocate those blocking objects. IR-emitting devices such as baby monitors and radio wave-emitting devices can hinder the Blaupunkt TV remote’s functionality.
Keep in mind that direct sunlight or a high source of fluorescent light can interfere with the remote’s IR signals. Ensure the remote and the TV are free from such interference. Also, keep magnetic objects a little away from the TV sensor. Then, check if the Blaupunkt TV remote works. If not, try the next solution.
Clean the Blaupunkt TV Remote
The accumulation of dust and debris on the Blaupunkt TV remote is inevitable and may cause functionality problems. To solve this, grab a soft microfibre cloth and clean the remote’s sensor, button gaps, and battery compartment. For thorough cleaning, dip the cloth in an Isopropyl alcohol solution and wipe the dust clearly. Once done, check if your Blaupunkt TV responds to the remote functions. If you still have an issue, try the next solution.
Power Cycle the Blaupunkt TV
The bugs or caches on the Blaupunkt TV may disrupt the TV’s response to the remote control. Because of this, you may think that the remote has gone faulty. You can try power cycling the Blaupunkt TV to fix power-related problems.
- Switch off the Blaupunkt TV and eject its power cord from the socket.
- Wait for a few minutes. Then, plug the TV cord back in.
- Press the Power key on your Blaupunkt TV panel to turn it on.
Now, point the remote towards the Blaupunkt TV and tap the volume up or down key. If it doesn’t turn the volume up or down, try the next method.
Check and Replace the Remote Batteries
If you cannot control the TV functions even after power cycling your Blaupunkt TV, inspect the remote batteries. The Blaupunkt TV remote can work only if the batteries are charged sufficiently. Remove the remote’s battery compartment lid and check the batteries.
If the batteries are bulging or inappropriate, replace them with new 2 AAA batteries. After that, check if the remote works. If not, proceed with the next fix.
Re-pair the Blaupunkt TV Remote
In rare cases, the remote might automatically get unpaired from your Blaupunkt TV. This happens when you leave the remote in unused condition for several days. Hence, you should pair the remote back with your Blaupunkt TV to control it.
- Pair the Blaupunkt Android TV remote – Power on the Blaupunkt TV → Hold the Left and Home buttons for 5 seconds when a pairing prompt appears on the TV screen → Choose the Remote → Hit the OK button.
- Pair the Blaupunkt webOS TV remote – After turning the TV on, click the Wheel key on the remote → A pairing is complete message will appear if the process is successful.
- Pair the Blaupunkt Google TV remote – Turn on your Blaupunkt TV → Hold the Home and OK buttons simultaneously to finish remote pairing.
Reset the Blaupunkt TV Remote
Resetting is another of the best troubleshooting techniques for fixing a remote issue. After resetting the remote, ensure that it is repaired with the Blaupunkt TV.
- Blaupunkt Android TV remote – Turn off the Blaupunkt TV and remove the TV cord from the source → After a minute, plug the TV cord back in → Hold the TV Power button on the TV to turn it on.
- Blaupunkt webOS TV remote – Long-press the Home and Back buttons for 5 seconds.
- Blaupunkt Google TV remote – Switch off the Blaupunkt TV → Take out the batteries from the remote → Hold the Home button and insert the batteries back into the remote → Once the remote light blinks, release the Home button.
Test the Blaupunkt TV Remote’s IR Emitter
Even after resetting, if you cannot control your Blaupunkt TV using a remote, check whether the issue is with the remote’s IR emitter. Grab the remote and point it towards the camera lens on your smartphone. Open the Camera app and ensure you can see the remote.
Press the Power button and see if the remote’s light blinks. If not, the remote’s IR is damaged. Also, look for visible hardware damage on the remote. If so, it is better to replace the broken component or buy a replacement remote.
Contact Blaupunkt TV Service Center
Whether your remote’s buttons are broken or the IR emitter is dysfunctional, visit the nearest Blaupunkt TV service center. The experienced technicians will repair your remote and bring it back to working condition. If your TV remote is new, you can ask for a remote replacement. For more info, visit the Blaupunkt TV customer support website.
Try Remote Alternatives
If your Blaupunkt TV remote is in the service center, do not worry. You can still control the TV effortlessly using these remote alternatives.
- Use Keyboard or Mouse – The Blaupunkt TV has a dedicated USB port. Plug a wireless keyboard or mouse dongle into the TV port. Then, you can control your Blaupunkt TV using the cursor shown on the screen. You can buy a wireless keyboard from Amazon if you don’t have one.
- Use the Remote app – Install the Blaupunkt TV remote app on your iPhone or Android. Then, run the app and pair your Blaupunkt TV to get a virtual remote.
FAQ
Power reset the Blaupunkt TV remote by removing its batteries and pressing all the keys 4-5 times. Then, insert the batteries into the remote and check if you can pair it.
You need to inspect the remote’s IR emitter by performing a camera test. If the remote’s IR emitter is defective, you can repair it from the service center or buy a replacement remote.
Yes. Pair a universal remote using Blaupunkt TV remote codes and use the controller to perform various functions.
