Are you confused about why your NOW TV remote keeps flashing green? This is a sign that the remote has been paired with the NOW TV box. Sometimes, the NOW TV remote may flash green even after pairing due to a hardware malfunction. Though these blinking light problems seem unusual, they can be rectified by the troubleshooting methods discussed in this article.
Apart from pairing attempts, some factors cause the NOW TV remote to flash green. Knowing these reasons can prevent the remote from becoming dysfunctional in the future.
| Issues | Reasons | Solutions |
|---|---|---|
| Signal Interferences | Blocking objects between NOW TV and the remote | Relocate the destructive objects |
| NOW TV remote keeps unpairing from the box | Caches in the NOW TV box | Restart the NOW TV box |
| The NOW TV remote is completely unresponsive | Drained remote batteries | Replace the batteries |
| Particular buttons in the NOW TV remote are not responding | Glitches in the NOW TV remote | Reset and re-pair the NOW TV remote |
Note: The effective troubleshooting techniques for fixing the NOW TV remote that keeps flashing green are nullifying the remote’s pairing issues and battery problems. The following section explains the process of resolving these issues.
Replace the NOW TV Remote Batteries
One primary reason the NOW TV remote keeps flashing green is the drained batteries inside the remote. These batteries may let the remote’s power go off, automatically unpairing the remote from the NOW TV. So, open the remote’s battery compartment lid and remove the old batteries. Insert new 2 AAA batteries at their correct polarities. Once done, check that the remote’s green light is off.
Use the NOW TV Remote in a Short Range
The remote can operate the NOW TV box only if it is within the Box functional range. Otherwise, the remote may lose its pairing connection and blink green. So, refer to the remote manual and use the remote within the NOW TV box range. If you don’t know the exact value, stand within 5 meters of the NOW TV box and sync the remote with the box. Then, check if the remote works well.
Remove the Signal Obstructions
The remote signals can’t be received by the NOW TV box if they are interrupted. Objects such as IR-emitting devices, baby monitors, or Bluetooth-transmitting devices can block remote signals. So, move these devices and other showpieces from the remote signal path. If the NOW TV box is inside a glass cabinet, wide open the glass and then operate the remote.
Clean the NOW TV Remote
Dust accumulation in the NOW TV remote may block the remote signals from reaching the NOW TV receiver. This may unpair the remote from the box and result in green flashing. So, pick a soft and clean the remote’s IR sensor. Once done, try controlling the NOW TV box. Also, ensure that remote buttons are depressed. If so, open the remote’s upper shell, clean the buttons, and use the remote. If the green light keeps flashing on your NOW TV remote, try the next fix.
Restart the NOW TV Box
Sometimes, cache accumulation on the NOW TV box may prevent it from responding to the remote commands. Also, unknown issues on the remote block the remote signals. These may result in connection loss between the NOW TV and the remote, leading to green flashing. To stop this, you should restart your NOW TV box.
- Pick the remote, open its battery compartment lid, and eject the batteries.
- Turn off the NOW TV box and disconnect its cables from the power source.
- After 5 minutes, connect the box cord to the power source and turn it On.
- When the NOW TV-connected message is shown on the home screen, insert the batteries into the remote.
- Thus, the remote will sync with your NOW TV box, and the green light will stop. If it doesn’t work, follow the next troubleshooting method.
Pair the Remote with the NOW TV Box
The NOW TV remote may flash green if it loses control of the box. This may happen due to signal interference, drained remote batteries, remote glitches, etc. Re-pairing the remote with the NOW TV box will stop the green light blinking problem in such a condition.
- Pick the remote and open its battery compartment.
- Remove the batteries from the remote and turn off the NOW TV box.
- Disconnect the box cable from the power source and wait for a few minutes.
- Then, connect the box cable to the electric socket and turn it on.
- Once you get the home screen, pick the remote and insert batteries into it.
- Following it, long-press the Pairing button.
- Release the button when the remote light blinks. The remote will then pair with your NOW TV box.
Note: If the remote light doesn’t blink after holding the pairing button, replace the batteries with new ones.
Reset the NOW TV Remote
One effective troubleshooting technique to stop the NOW TV remote from flashing green is by performing a remote reset. This will nullify the remote’s remote glitches and connectivity issues that cause the remote light to flash.
- Reset Voice Remote – Remove Remote Batteries → Turn off the NOW TV and disconnect its cable → Connect the box to power and turn it On → When the logo appears, hold the Reset or Pairing button on the remote battery compartment → The remote light will blink indicating successful reset.
- Reset Basic Remote – Plug out the NOW TV box cable and remove remote batteries → After a minute, connect the NOW TV box to power and turn it on → Hold the remote’s Home and Back buttons → Stop pressing when the remote’s light flashes.
Reset the NOW TV Box
If restarting, resetting, or pairing the remote with the NOW TV box doesn’t stop the remote’s green light flashing, you have to reset your NOW TV box to factory defaults. Doing so will bring up the remote settings to a default state. Also, remember that it erases the NOW TV box data. You can reset the NOW TV box by going to Settings or by holding the Reset button on its panel.
Inspect the Remote’s Components
If this software troubleshooting doesn’t pay off, the issues might be due to the remote’s hardware parts being damaged. For example, if the remote’s IR is faulty, the remote can’t send signals to the box or unpair them from the box, resulting in a green flashing issue. To check the IR sensor functionality, open the smartphone Camera app and bring the remote facing the phone’s rear camera. Press any button on the NOW TV remote, and you should see a light. If not, the remote’s IR is faulty.
Contact NOW TV Customer Support
When repairing the remote’s IR emitter, it is wiser to contact NOW TV’s customer support instead of visiting service centers. They will pick up your remote and inspect the issues. Once done, they will revert to you and tell you whether to repair the IR or replace it. You can follow their guidance and get the issue resolved.
Try These Remote Alternatives
If you can’t afford to repair the remote currently, you can fix them in the future. In the meantime, rely on the following alternatives to control the NOW TV box.
- Use Remote App – If your NOW TV box runs on Roku OS, you can control it via The Roku App. Install the app on your Android or iPhone and pair it with the NOW TV. Then, you can use it to control the Roku-powered NOW TV box.
- Use IR Remote App – If you own an IR-built-in Android smartphone, open the Play Store and install the IR remote app. Pair the app with the NOW TV box. Once done, manage the NOW TV functions using the app icons.
Using the techniques we discussed, you can quickly fix the NOW TV remote blinking light issues. If the remote malfunctions frequently, it is better to use remote apps to operate the NOW TV box.
