Are you searching for instructions to program a WOW! universal remote? You have come to the right place. The procedure for programming a WOW! remote differs as there are different models. All you need is remote codes. This article explains the procedure to set up all WOW! remotes using respective codes.
Steps to Program the WOW Remote with TV
The WOW! remotes are of 6 different types. Based on the WOW! remote you have, follow the steps to program it with your TV. Ensure your TV is turned on during the entire process.
Program WOW! Experience Remote
Programming the WOW! Experience remote to a TV can be done in three ways,
Manual Code Entry
1. Hit the A (Yellow) button on your WOW! remote.
2. Long-click the OK and Mute buttons on the remote.
3. Release the buttons when the remote’s Power button flashes 2 times.
4. Type the remote code for your TV brand. If you don’t know the remote code, refer to this PDF file.
5. Click the Power button, and your TV should turn off. If your TV fails to turn off, try another remote code.
Using TV Brand Code
This method applies only to selective TV brands.
1. Hold the OK and Mute buttons on the WOW! remote.
2. Let go of the buttons when the remote’s Power button flashes twice.
3. Hit the Yellow (A) button on the remote.
4. Hold the Single-digit remote button allocated for your TV.
- Single Digit Remote Code: Vizio – 0, Dynex/Insignia – 1, Zenith/LG – 2, Mitshubishi – 3, Panasonic – 4, Magnavox/Philips – 5, Samsung – 6, Sharp – 7, Sony – 8, Toshiba – 9.
5. Release the respective number button when your TV turns off.
Automatic Code Search
1. Hold the OK and Mute buttons on the WOW! remote. Release it when the Power button flashes twice.
2. Hit the Yellow (A) button on the remote.
3. Hold the OK button until your TV turns off.
If the TV gets turned off, the WOW Experience Remote programming is completed.
Program WOW! Arris MP2000 URC2054 Remote
You can program this WOW! Arris remote model in two ways.
Manual Code Entry
1. Hold the Menu and OK buttons on the remote.
2. Release the button when the remote’s Power button blinks 2 times.
3. Type a 5-digit remote code assigned to your TV. As a result, the Power button will blink twice. To know the remote code, refer to this PDF file.
4. Tap the remote’s Power button to check whether it turns the TV off. If your TV doesn’t turn off, repeat the process by trying another remote code.
Automatic Code Search
1. Long-press the Menu and OK buttons on the Arris remote.
2. Using the remote’s number pad, type 9 9 1.
3. Click the 1 number button on the remote.
4. Continuously tap the Cursor Up button. Once your TV turns off, release the button.
5. Finally, hit the OK key on the Arris remote to save the code.
Program WOW! Transport UEC3268 Remote
You can program the WOW! Transport remote by entering the codes manually or by auto code search.
Manual Code Entry
1. Long-press the SET button on the remote.
2. Release it when the remote’s red light blinks 2 times.
3. Type the remote code for your TV brand. The remote’s red light will blink twice if the code is correct. Get the remote code for your TV brand from this PDF file.
4. Hit the remote’s Power button. It should turn your TV off.
5. Turn on the TV and try controlling the TV functions. If the TV fails to respond, try another remote code.
Automatic Code Search
1. Hold the SET button. Release it when the red light on the remote blinks twice.
2. Type 9 9 1, and the red light will blink twice again.
3. Repeatedly click the Channel Up button on a UEC3268 remote.
4. Stop pressing the Channel Up key on a remote if your TV turns off.
5. Finally, tap the SET button to save the code.
Program WOW! Polaris URC1090 Remote
You can program the WOW! Polaris remote with a TV using two methods.
Manual Code Entry
1. Hit the TV Power button on the Polaris remote.
2. Hold the Setup button on a Polaris URC1090 Remote.
3. Let go of the button when the remote’s Power button flashes twice.
4. Type the remote code for your TV using the remote’s number pad. To learn the remote code for your TV brand, refer to this PDF file.
5. Hit the Power button, and your TV should turn off. If not, repeat the process by inputting another remote code.
Automatic Code Search
1. Press the TV Power key on a Polaris URC1090 Remote.
2. Hold the remote’s Setup button.
3. Release it when the remote’s Power button flashes 2 times.
4. Enter 9 9 1 using the numeric pad.
5. Continuously click the Channel Up button.
6. Stop clicking it when your TV turns off.
7. Finally, tap the Setup button to save the remote code.
Pair WOW! Atlas URC1056B04 Remote
You can program this WOW! remote to your TV by entering the code manually or searching for the code.
Manual Code Entry
1. Click the TV button on the WOW! remote.
2. Then, long-press the Setup button.
3. Let go of the button when the remote’s TV button flashes 2 times.
4. Type the remote code for our TV brand. If you don’t know the remote code, visit this PDF file.
5. Hit the Power button on the WOW! remote, and your TV should turn off. If not, repeat the process by entering another remote code.
Automatic Code Search
1. Click the TV button on a URC1056B04 Remote.
2. Hold the Setup button on the WOW! remote.
3. Using the remote’s numeric key, 9 9 1.
4. Continuously press the CH+ key on the remote.
5. Stop pressing the CH+ key once your TV turns off.
6. Then, power on the TV by pressing the Power button. To save the code, press the Setup button.
Program WOW! Atlas URC1056A03 Remote
You can program this Atlas URC056A03 remote using two techniques.
Manual Code Entry
1. Initially, tap the TV button on an Atlas URC056A03 remote.
2. Then, hold the Setup button on a URC56A03 remote.
3. Release it when the remote’s TV button flashes 2 times.
4. Type the remote code for your TV brand. To know the remote code, visit this PDF file.
5. Aim the remote towards the TV and hit the Power button.
6. If your TV turns off, the remote pairing is successful. Otherwise, try another remote code.
Automatic Code Search
1. Hit the TV mode button on a URC56A03 remote.
2. Hold the remote’s Setup button.
3. Once the TV button blinks 2 times, release the Setup button.
4. Press these number buttons, 9 9 1.
5. Continuously click the Channel Up key until your TV turns off.
6. Finally, hold the Setup button to save the remote code.
FAQ
The issue arises for reasons like the wrong remote code, the TV being partially turned on, low battery on the remote, signal interference, etc. Rectify these errors to program the WOW! remotes properly.
