If you are going to use a universal remote for the first time, the term “remote codes” may sound unfamiliar. Since universal remotes control various devices, you need to enter a code to program a remote with that device. Most universal remotes offer remote codes for all brands with a user manual, whereas others don’t. In this guide, we will show you how to set up a universal remote with the Supersonic TV using remote codes and without them. Additionally, we have tabulated the list of 4 and 5-digit remote codes that are assigned to it.
List of Remote Codes for Supersonic TV
The remote codes for the Supersonic TV will be either 4 or 5 digits, as given below.
| Code Format | Remote Codes for Supersonic TV |
|---|---|
| 4 Digit | 5330, 4701, 3894, 3877, 3595, 3593, 3204, 3154, 2881, 2784, 2397, 2104, 1753, 1421, 1337, 1301, 0944, 0901, 0861, 0832, 0698, 0556, 0482, 0471, 0455, 0341, 0264, 0241, 0208, 0096, 0037, 0036, 0009 |
| 5 Digit | 19715, 18826, 18437, 18339, 17231, 17048, 16032, 14216, 13894, 13877, 13595, 13593, 13204, 13154, 13147, 12784, 12403, 12397, 12104, 11753, 11748, 11531, 10223, 10178, 10125 |
Steps to Program Universal Remote to Supersonic TV With Codes
No matter which universal remote model you own, the pairing steps are common for most remotes. To program the universal remote with your TV, insert fresh batteries into the remote. Then, turn on your Supersonic TV and follow the process.
Manual Code Entry
1. Locate and click the TV button on a universal remote.
2. Hold the remote’s Setup button, and the remote’s LED will light up.
3. While holding the Setup button, type the 4 or 5-digit remote code allocated to your Supersonic TV.
4. If the entered code is accepted, the remote’s LED will flash two times.
5. Press the Power key on a universal remote and check if it turns off the Supersonic TV. If not, repeat steps 1-3 by entering a new remote code.
Auto Code Search
1. Hit the TV key on the universal remote.
2. Long-click the Setup button. As a result, the remote’s LED will start blinking.
3. Press the 9 9 1 number buttons on the remote.
4. Hold the Power button and repeatedly press the Channel Up button on the remote.
5. Release both the buttons when your Supersonic TV turns off. Thus, the programming is successful.
Guide to Program Universal Remote to Supersonic TV Without Codes
1. Ensure your Supersonic TV is turned on and aim the universal remote towards it.
2. Hold the TV and OK/Select buttons on a universal remote for 5 seconds.
3. Click the Channel Up and Channel Down buttons.
4. Following it, press the Up and Down buttons repeatedly.
5. Release both buttons when your Supersonic TV turns off. If that happens, universal remote programming is done.
6. Then, power on the Supersonic TV again by pressing the Power key. Then, check whether all the remote functions work.
If you can’t program a universal remote with your Supersonic TV using the above-mentioned procedures, don’t worry. Contact your universal remote manufacturer’s customer support and seek assistance.
