If you have a Blackweb universal remote, you can program it into your device in two ways: by entering a code or without it. Both remote programming procedures are simple; you only need a little patience and minimal effort. This article provides instructions for two methods of programming a Blackweb universal remote to any device.
Steps to Program Blackweb Remote to TV without Code
No matter what Blackweb universal remote model you own, the steps for programming using the auto search function are the same. Keep your device turned on as a requirement.
1. Grab the Blackweb universal remote and locate the Program button.
2. Long press the Program button on a Blackweb universal remote.
3. Release the program button when the remote’s Power button blinks red. After releasing, the Power button light will stay lit.
4. Hit the TV button on a Blackweb universal remote.
Note: Since we are pairing with the television, click the TV button. To program a universal remote to other devices, press the respective device button accordingly.
5. Aim the Blackweb universal remote towards your TV.
6. Long-press the OK button on a remote to run the code search function. Your TV will turn off
7. Let go of the OK button when your TV turns off. As a result, the remote’s power button will flash.
8. Once your TV turns off, hit the OK button to save the code. Now, the power button light will go off.
9. Check whether the Blackweb remote controls your TV. If not, repeat the process from the beginning.
If the remote still fails to pair with your device, the remote’s code may not be found. As a confirmation, the remote’s Power button will flash thrice. In such cases, try the next method.
Steps to Program Blackweb Universal Remote with Code
Before proceeding, you should visit this website to know your device’s pairing code. Then, turn on your TV and follow the process.
1. Long press the Program button on a remote. Release the button if the remote’s Power button lights up.
2. Click the TV button, and the remote’s Power button will flash red 2 times.
3. Input a 4-digit remote code using a Blackweb universal remote. The power button’s red light will go off if the code is correct. If it stays on, try another remote code.
That’s it. The remote programming is successful. You can control your TV using a Blackweb universal remote.