Did you hook an Ignite TV or Ignite Streaming box to your TV? If so, you must be looking forward to programming the remote. Remember, Rogers Ignite Remotes are available in different models, so the pairing steps will vary accordingly. This article provides the steps to program all Roger Ignite Remote models.
Program Rogers Ignite Voice Remote to TV
You can pair the Ignite Voice Remote with your TV via settings or by pressing remote shortcuts. Turn on your TV and follow the remote pairing process.
Using Settings
If you have already paired the remote with your Ignite device, turn on the Ignite device to begin the process.
1. Click the A button on the remote. As a result, the Ignite device’s settings will open.
2. Under settings, tap the Remote Setup option.
3. The pairing instructions will pop up on the Ignite device-connected screen.
4. Follow the process and program the remote with your TV.
Using Remote Buttons
1. Long-press the Rogers and Info (i) button together for 5 seconds.
2. As a result, the remote red light will change to green.
3. Press the number buttons on the remote, 9 9 1.
4. Now, the remote’s green light will link 2 times.
5. Then, click the Channel Up button continuously. Release the key when your TV turns off.
6. Once your TV is turned off, press the Select button to lock the code.
That’s it. The remote pairing is successful.
Program Rogers Ignite Big Button Remote with TV
There are three ways to pair the Rogers Ignite Big Button Remote with the TV, which are given below.
Direct Code Entry
1. Click the TV Power button on the Ignite remote.
2. Long press the remote’s Setup button.
3. Release the Setup button when the remote light flashes 2 times.
4. Type the remote code assigned to your TV. Check this PDF file to find a code for your TV that is suitable for setting up an Ignite big button remote.
5. Check whether the remote control your TV by pressing the power, volume, or mute keys. If your TV doesn’t respond, try another remote code.
Auto Code Search
1. Long press the Setup key on an Ignite Big Button Remote.
2. Let go of the Setup button when the remote light flashes twice.
3. Tap the TV Power button on the Ignite Big Button Remote.
4. Following it, long-press the OK or Select buttons on the Ignite Big Button Remote until your TV turns off.
5. If your TV turns off, the Ignite Big Button Remote pairing is successful.
Single Digit Code [Select TV Brands]
1. Long press the Setup key on an Ignite big button remote.
2. Release the Setup button if the remote’s light blinks 2 times.
3. Hit the TV Power button on the Ignite Big Button Remote.
4. Long-press the Single-digit remote button assigned to your TV.
- Remote Codes: Vizio – 0, Dynex/Insignia – 1, Zenith/LG – 2, Mitsubishi – 3, Panasonic – 4, Magnavox/Philips – 5, Samsung – 6, Sharp – 7, Sony – 8, Toshiba – 9.
5. Release the key when your TV turns off. If so, the remote pairing is completed.
Program Ignite Rogers XR11 Voice Remote to TV
You can program the Ignite Rogers XR11 Remote with TV in three ways.
Using Settings
1. Ensure your TV and the Ignite entertainment box are turned on.
2. Click the Rogers XR11 remote’s A button.
3. It will bring up settings; tap on Remote Setup.
4. Following the instructions on your Ignite box-connected screen, you can pair the remote with the TV.
Auto Code Search
1. After turning on your TV, long-press the Setup button on the Ignite XR11 remote.
2. Release the Setup key when the remote’s red light turns green.
3. Type 9 9 1 using the remote’s number pad. As a result, the remote’s green light will blink 2 times.
4. Click the Channel Up button continuously. Stop clicking it when your TV turns off.
5. Finally, hit the Setup button to save the code. Now, you can operate the TV using the Rogers Ignite XR11 Remote.
Manual Code Entry
1. While your TV is On, long-tap the Setup button on the remote.
2. Release the Setup button if the remote’s red light turns green.
3. Input a 5-digit remote code given to your TV. To know your TV’s remote code, refer to this PDF file.
4. If the code is correct, the remote’s status light will blink green 2 times.
5. Check whether the remote controls your TV by clicking the Volume, Mute, or Power button.
Pair Ignite Rogers XR15 Voice Remote with TV
Like the XR11 remote, you can program the Ignite XR15 remote in two ways.
Using Settings
1. Turn on your Ignite entertainment box and TV to which you want to program.
2. Hit the A button on the Ignite XR15 remote.
3. Under Settings, choose the Remote Setup option.
4. Pair the remote with the TV by following the instructions on the screen.
Auto Code Search
1. Long-press the A and D buttons together on the XR15 remote.
2. Let go of the buttons when the remote red light turns green.
3. Click on the following number buttons, 9 9 1. As a result, the remote light will blink green 2 times.
4. Hit the Channel Up button repeatedly. Stop hitting the button when your TV turns off.
5. Finally, tap the Select button to save the code.
Direct Code Entry
1. Long press the Rogers and Mute buttons on the XR15 remote.
2. Release the buttons when the remote’s red light changes to green.
3. Type the remote code for your TV. Visit this website to get your TV’s remote code through the CodeFinder tool.
4. Test the remote control by clicking the power, volume, or mute buttons. If your TV doesn’t respond, repeat steps 1-4 with a different remote code.
Can’t Program Ignite Voice Remote – What’s Next?
You can reset the Rogers Ignite Voice Remote to fix the issue. Hold the A and D buttons at a time until the LED changes from red to blue. Enter 9 8 1 using the remote’s number pad. The LED on the remote flashes to indicate that it has been reset. Re-program the remote to control your Ignite box and TV.
