If you have a Shaw Direct SAT or cable set-top box, you will be offered a Shaw Direct remote control. This remote allows you to control the TV and set-top box. What if the Shaw Direct Remote stops working? No worries. You can program a universal remote to your Shaw Direct device using remote codes and operate it easily. In this article, we have attached codes for popular universal remote brands, including the procedure for remote programming.
List of Remote Codes for Shaw Direct
The 4 and 5-digit codes to program a universal remote to a Shaw Direct device are given as follows.
Shaw Direct SAT
| Remote Brand | 4-digit Code | 5-digit Code |
|---|---|---|
| RCA Universal Remote | 0775, 0869 | 50775, 50869 |
| OneForAll Universal Remote | 0775, 0869, 1870, 1871, 1873, 1872, 1875, 1874, 1876, | – |
| Philips Remote | 2734 | – |
| GE Backlit Universal Remote | 2734 | – |
Shaw Direct Cable
| Remote Brand | 4-digit Code | 5-digit Code |
|---|---|---|
| OneForAll Universal Remote | 1376, 0869, 1877 | – |
| Philips Remote | 2734 | – |
| GE Backlit Universal Remote | 2734 | – |
How to Program Universal Remote to Shaw Direct Device
You can program the RCA, Philips, OneforAll, and GE Backlit universal remote to your Shaw Direct device. The steps to program each remote model may vary. The following section covers the programming steps for all four remotes.
Program RCA Remote to Shaw Direct
You can program the RCA universal remotes to the Shaw Direct SAT device by entering the code manually or by auto-search.
Manual Code Entry
- Turn on your Shaw Direct SAT device and point the RCA remote towards it.
- Hold the Code Search button until the remote light blinks.
- Click the SAT button on the remote, and the remote light will flash and stay on.
- Now, input the 4 or 5-digit remote code using the numeric keys.
- Then, click the Power button, and your Shaw Direct should turn off. If not, try another remote code.
Auto Code Search
- Hold the Code Search button until the remote light blinks.
- Then, click the SAT button, and the remote light will blink and stay on.
- Point the remote towards the Shaw Direct box and press the Power button.
- Once your Shaw Direct device turns off, hit the Enter button to save the code.
Program One For All Remote to Shaw Direct
One For All remote supports controlling Shaw Direct Cable and SAT devices. You can program a One For All remote to your device by following these steps.
Manual Code Entry
- Initially, long press the Magic button until the Device (currently programmed) button blinks and remains On.
- Click the Device button until the Sat/Cable button lights up.
- Following that, enter the 4-digit remote code, and the remote light will flash two times.
- Then, tap the remote’s Power button, and your Shaw Direct device will power off.
SimpleSet Code Entry
- Long press the Magic button until the remote’s Device (Currently paired) button flashes two times.
- Then, continuously press the Mode/Device until the SAT/Cable buttons light up.
- Hold the single-digit button on the remote concerning your Shaw Direct device.
- Release the button once your Shaw Direct device turns off. The indicator light on the remote will flash, and your Shaw Direct device will turn off.
Program Philips Remote to Shaw Direct
Switch on your Shaw Direct device and press these buttons on the Philips universal remote.
- Hold the SAT/Cable button until the remote light turns on.
- Input the 4-digit remote code, and the remote light should turn off. If not, try inputting another remote code.
- Following it, hold the Standby button until your Shaw Direct device turns off.
- Click the Power button to turn on your Shaw Direct device.
Program GE Remote to Shaw Direct
You can program the GE universal remotes to your Shaw Direct box by manually entering codes or running the auto-code search.
Manual Code Entry
- While your Shaw Direct is On, point the GE universal remote towards the device.
- Hold the Setup button till the remote indicator light lights up.
- Then, click the SAT/Cable button. The remote will flash and remain on.
- Input the 4-digit remote code using the number pad, and the remote light will turn off. If the light blinks, then try another code.
Auto Code Search
- Hold the Setup button until the remote indicator lights up.
- Click the SAT/Cable button on the remote. The remote light will flash and stay idle.
- Following it, continuously press the Power button till your Shaw Direct turns off.
- Once your Shaw Direct turns off, click the Power button again to turn it On.
- Then, keep pressing the Volume Up button at the interval of 3 seconds until your Shaw Direct box turns off.
- Once your Shaw Direct turns off, save the code by clicking the SAT/Cable button.
FAQ
Yes. You can program a Shaw Direct remote to a TV by pressing the shortcut keys or entering suitable remote codes.
