If your Skyworth TV remote has stopped working, don’t panic. The remote not working is a common issue that arises due to several reasons, such as drained batteries, IR sensor issues, pairing issues, and more. Nevertheless, basic troubleshooting techniques can fix this remote issue.
Before heading to the solutions, knowing the cause of the issue will pave the way to troubleshooting the issue quickly. The table below has a keen analysis of the Skyworth TV issues and their reasons.
Problems | Reasons | Solutions |
---|---|---|
TV not responding to remote | Fluctated signals | Remove the objects near the TV that block the signals from the remote. |
The remote not functioning properly | Low battery or drained completely | Change the remote batteries |
Remote buttons stuck | Deposition of dust and debris | Clean the remote |
Remote malfunction | Technical glitches | Reset the Skyworth remote |
Hardware issues | Damage in remote components | Contact Skyworth support |
Use the Skyworth Remote Within Range
The range factor can also be a reason for the Skyworth TV remote not working scenario. There is a certain limit range within which the remote should be used to control the TV. If you own an IR remote, try controlling the TV within 30 feet. Bluetooth remotes can also be used within 30 feet. If you exceed beyond it, the Skyworth TV might not respond to the remote commands.
Remove the Signal Obstructions
To control the TV properly, the signals from the remote should reach the Skyworth TV. If not, the remote cannot perform its task over the TV. So, ensure that there are no objects present in the signal communication way between your TV and the remote. If found, relocate those objects from the remote IR signal path.
Clean the Skyworth Remote
Usually, the remotes are left uncovered as a result they get deposited with dust and tiny particles. These accumulated particles may block the remote signals or the normal functioning of the remote buttons. Like removing the blocking objects from the remote signal path, it is also necessary to remove the tiny debris deposited on the IR sensor of the remote. This will help the signals emitted from the remote to reach the Skyworth TV. Also, clean the remote buttons and their gaps gently, ensuring the smooth functioning of the buttons.
Check Remote Battery
The battery determines the proper functioning of the remote. Using an old or low-power battery will not help the remote control the TV. So, it is mandatory to check the battery condition of the remote occasionally. If the battery has no power, immediately replace it with a new battery. After changing the batteries, check whether the Skyworth TV remote is working or not.
Pair Skyworth TV Remote
At times, the remote may automatically get unpaired from the Skyworth TV. This may occur if the remote is left in unused condition for a longer time. Long-press the Back / OK and Home buttons to re-pair the remote. After pairing the remote back to the Skyworth TV, check whether the TV responds to the remote.
Reset the Skyworth TV Remote
Resetting is one of the most effective techniques for solving remote-related issues. Upon resetting the Skyworth TV remote, you can fix the bugs or glitches it presents. Remember that resetting will unpair the remote from the TV, so you have to pair the remote back to Skyworth TV after resetting it.
Reset Skyworth Android remote:
Skyworth Android TV remote resetting steps involve unpairing and re-pairing the remote.
- Turn off the TV and remove the TV cable from the power cord.
- After a minute, plug back the TV’s cable into the power cord.
- Now, hold the TV Power button until your TV turns On.
- After the TV turns on, concurrently hold the Home & OK buttons to pair the remote.
Reset Skyworth Google remote:
- Turn off the Skyworth TV and remove the batteries from the remote.
- Long-press the Home button and insert the batteries without releasing the button.
- When you see the LED light flashing on the remote, release the Home button to finish the reset process.
Contact Customer Support
If the issue persists after resetting, it means the problem is with the remote’s hardware components. In this case, you must seek the support of authorized Skyworth TV remote technicians. Whatever the hardware issue may be, proceeding with customer support is a wise choice. Contact Skyworth TV remote support and repair your remote.
Try these Remote Alternatives!
If you cannot fix the remote even after trying all the troubleshooting techniques, you can use the Skyworth remote app as a replacement for your remote. Get the Google TV app from the Play Store or App Store on your Android or iPhone. Also, connect your Skyworth TV to WiFi, which should be identical to your handheld device. Then, open the app and pair it with your Skyworth TV. Now, you can start controlling it using the remote interface on the app.
You can also get a universal remote from Amazon to control Skyworth TV. It delivers the feel of using the standard TV remote, so you can easily access the menu and other functions of the TV.